EXCEL approach also copied to the above.
 

CAD, word, excel conversion between (Author: Snow Dream)
one, CAD graphics or tables copied to WORD, EXCEL steps
1, change the CAD system variables WMFBKGND is OFF, the CAD background transparent,
graphics if you want to copy black and white, can be in the Layer Manager, which the layer color to white (7);

2, select the graphic you want to copy, use the

3, switch to the WORD or EXCEL, activation need to paste the area, and then select

4, paste the original results as shown;

5, using the ;
6, the effect of cutting and scaled as shown;

7, such as graphics need to be modified, press the CAD Drawing to be modified to return to;

EXCEL approach also copied to the above.
Second, WORD, EXCEL graphs or tables copied to the CAD step
1, select the need to copy the graphic or table, use the
2, switch to the CAD program, and then select
3, select Paste as

4, choose Paste the insertion point, as shown after the effect of paste;


5, lines or text after paste can be edited directly in the CAD, as shown below;


CAD to the Office to add a few: CAD map pasted into Word, Excel, PowerPoint, Publisher can use this method.
1, line width - the proposed multi-segment line to set the line width, because the width width width of only two post-paste, not pretty;
2, the proportion of the problem - if possible, maximize the use of 1:1 drawing, where the ratio of 1:1 is printed, that is, the need to print to 10mm,
graphics to draw into 10 units, both to control the map scale, but also can control the line width;
3, background Colors - 2002 in the layout of the space (the background of the general layout of the space is white) copy, 2004,2005,2006 copied directly on the line, no need to modify the background color.

slightly statesman
 

slightly statesman wow gold money, the uncolored heal buy wow gold to this income was full lace wig in the bag. But he did not cheap football jerseys simpleton, jazz apiece additional faculty not wow gold let go, to pose the night reduction, to .