We have to memorize namely 20 category of PS techn

! ! The United States will not do your photos ! ! !


Photo name: send up photos soft blue and yellow - a simple course,
1, open the original material, press Ctrl + J to copy the background layer a layer, point channel panel, select the blue channel, image> apply image, layer as the background, mixed to Multiply, opacity 50%, RP tick,
2, Back to the Layers panel, create a curves adjustment layer, and blue channels: 44,182, red channel: 89,108
3, create a new layer, fill it with black blend mode to Multiply and Opacity to 60%, choose the Elliptical Marquee Tool middle selection, press Ctrl + Alt + D Feather, a value of 70, and then double-click the Delete key to delete, resort to the text, complete the final effect.


Photo name: bring up photos pretty red and yellow,
1, open the original material, Ctrl + J to copy the background layer a layer, press Ctrl + Shift + U to color, run: Filter Mirror> Fuzzy> Gaussian Blur, number 4, for the color filter layer blending modes, layer opacity to 27%.
2, create a new layer, reception Ctrl + Alt + Shift + E seal layers, layer blending mode to color. 3, create a gradient map adjustment layer, violet - orange, Alt + Ctrl + G with clipping disguise.
4, create the brightness / contrast adjustment layer, -5, -21
5, create a Smart Sharpen adjustment layer, set to the default value, number 46, radius 0.8, Gaussian blur,
6 , create a Levels adjustment layer, 8,1.00,255
7, the color adjustment layer to create an optional, Red: +17, -8, +16,0, yellow: -54,0, +10, + 18, white: -5,0,0,0,


Photo name: bring up nostalgic outlook photos,
1, open the original copy layer
2, curve adjustment, numerical RGB: 109,99
3, hue saturation, value: 0, -39,0
4, color balance , values: 0,0, -34
5, optional colors, neutral colors: 0,0, -20,0
6, a new layer, fill d7b26c, layer mode overlay, opacity 56 %,
7, the clouds pluck stuff into the diagram, into the original altitude, soft light layer mode, the appearance chapter of the sky in appending to wiping out, back layer (Ctrl + Alt + Shift + E)
8, optional color, black: 0,0, -14, -5
9, a new layer, fill 0d1d50, excluding layer mode, copy a layer, filling 52%
10, curve adjusted value of RGB: 128,155
11, color balance, value: +24, +7, -64, filling 70%
12, gradation, value: 29,1.00,227, filling 58%
13, optional colors, independent colors: +16, +12, -11, +5
14, back layer (Ctrl + Alt + Shift + E), color balance, value: +24, +7, -64, filling 38%
15, back layer (Ctrl + Alt + Shift + E), opacity 46%, filling 48%,
16, Ctrl + E Merge Visible, Sharpen photos about


Name: youth people deal with the slight skin out,
1. Duplicate the background layer. Filter - Blur - Gaussian blur radius to 10.
2. set the layer blending mode to Double-click the layer label to open the right mixture of options. In the Advanced Mixed, delete progressive R and G channels,
3. Use of the color balance of the image curve, according to the picture to decide
4. Create a new layer, select the repair Brush (J), select layer example. Freckles or blemishes on the large, ######## removed.
5.ctrl + shift + alt + E, stamp all layers, tick the skin part, you can prefer their own way, I rather the pen tool, merely you can also use the Polygonal Lasso tool, to Note that to deal with the skin, so to remove the eyes, eyebrows, lips, noses. Anti-selection (ctrl + shift + i) delete the addition to the skin, excess parts.
6. Filter - Blur - Gaussian Blur with a radius of 20. Set layer opacity to 75%
7.CTRL + J, duplicate the layer 3 filter - Other - High Pass radius of 4, mixed mode to >

Photo Name:
1. Open the original image, copy the biggest contrast of the blue channel,
2. and then use Levels to further increase the contrast, the purpose namely to just let the stone have membranes
3. to adjust the fine blue Copy to copy the layer inside the channel and to add the color you ambition, I used the deep orange
4. to copy the red channel to the base map layers, using masks to remove the sky and stone, leaving only the grass and to add color with the Gradient Map
5. Open the material speedy ball, copy the contrast of the red channel to have the largest file
6. Select the layer blend mode to Overlay and adjust the place and size, production it a light source, remove some unnecessary entities (to determine), then use the radial blur filter to knob it radiation, allowed the formation of the beam emitted
7. to copy the base map of the red channel inside the channel, enhancing the contrast, so that The high light some of the grass revealed more apparently, and then select the layer of high optical part of the paste inside, with white fill, layer mode to Overlay, and then use the mask to remove the white part of the sky, leaving only part of the grass, the grass appears to be glare of light
8. Select the mask layer 1 and then invert the selection, selection by the sky, adding curves and hue / saturation adjustment layer to adjust according to private favorite and the naturalness of the color you like
9. Finally, add some posters element, so that looks real ######## posters that in use of color,If you penetrate me needy , amuse caution me, I try to choose the gold to the color of decorative and stones, so that colors alter between reverberate


Photo Name: sea beach,
1. Open the original, the new layer (Ctrl + Shift + Alt + N), and then stamp visible layers (Ctrl + Alt + Shift + E),
2. into the channel, copy the relatively strong likened the green channel, and then increase the contrast, white white, black, black, or with a brush (overlay mode) Ctrl + Green channel copy, extract constituency
3. the sky material defer in, create masks, wiping the figure
4. establish layer, soft light mode, to make the sky see better,
5. to do the water reflection, Ctrl + T vertical flip, create masks, with a brush to draw your lusted , Multiply mode effect better, for plans vary,
6. color, adjust according to private habits, good use of the optional color,
7.Shift + Ctrl + Alt + E, stamp shown in Figure layer, layer mode Multiply, and then mask the darker corners of pressure, mainly for the water pressure of the dark, make the picture more balanced,
8. Filter - Noise - Add Noise, number 3, Gaussian distribution, color, make the characters and the same grainy sky,
9, the last fill the sky material


Photo Name: PS effects in corner hand-painted photographs,
1. open the original documents, according to their own sense of color adjustment through the adjustment of the membrane, and then resurfacing, dermabrasion merit not also much, (Neat image plug-in)
2. a new layer, color FEE7D6, (based on the color to set the film characters ), the layer mode to Overlay and 25%, 20% with a brush in the face and nape skin and light coating,
3. traits of the detailed go, mowing out the jaws, the emergence Copy (Ctrl + J), with Apply tools to apply the lip, so that the skin becomes soft and smooth lips (not too much strength)
4. Create a new layer to the lips and face paint, the color is FDC1D6, layer mode to Color, lip and face with a brush in the side of the painting,
5. with the Dodge tool, the range is the high light exposure of 25% to draw the high-light some of the lip, with the Burn tool, the range is the middle 20% of exposure, reinforce the lips contrast,
6. a new layer, color 8E1A25, 3 pixel brush to paint the inside lane, and then draw 2 pixels outside the lip lines (high-light mask Dodge built some lines more)
7. on the nose to circle the emergence, reproduction, use painting tools to be gentle around the nose refined, and then use the Dodge tool range is a high light exposure of 20%, strengthening the high-light the next part of the nose, and then Color 422B2D, a 2 pixel brush to draw the outline of the nose (whether the short lines to make up for using better tools for the next)
8. eclosion circle replication of the eye brows, eye brows with the smudge tool around the soft skin thinning, and then use the Dodge tool range is a high light exposure of 15%, strengthening the high-light parts under the eyes, with better tools the middle range and deepen the lines around the eyes,
9. coated tools used to apply some fine eyes, look softer, with some better tools to promote black eyes, with the Dodge tool range is a high light exposure 20% of the degree to strengthen the high-light part of the eyes, making eyes look brighter,
10. color 080,101, 3-pixel brush, draw the lashes part (line Dodge tools to deepen the color depth can be secondhand to make up) can also be used eyelash line paths and additional ways triggered,
11. with stain tool to apply the prettier eyebrow, his brow slightly darker color of the rough spots that smear back along the disappear down, and then 2 pixels with a brush to draw eyebrows in the front eyebrow lines, the eyebrows more structured,
12. smudge tool to choose the hair brush, (according to hair texture to set brush shape), applied the process to be applied along the texture of the hair, not too much coerce to apply the uniform,
13. hair brush applied partial to the natural interface, the (hair have to be applied cautiously)
14. Draw the cilia texture to a new layer, layer mode to overlay, select the pencil pixels to 1 (the value resolved according to the size of character images), color, hair texture for the DFDFDF paint down flat lines
15. horsetail some select brush tool, brush easily with a fork some of the paint along the texture, color, pattern layer above,
16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% of flow, color is white, draw dynamic forehead hair,
17. clothes and pendants with the smudge tool applied some of the softer, and then select the Dodge tool with a range of high light , exposure 20%, clothes and pendants to enhance some of the high-light
18. Synthesis, sharpen the picture as a whole, sharpening is 8, with the Dodge tool to highlight some of the little processing, the overall color correction, the ( can be modified to add some background light, highlighting the theme)


Photo Name: post-makeup Raiders,
1. Open the file, duplicate a layer copy of the
2. Select the duplicate layer by free transform to change the shortcut keys ctrl + t to make the characters more thin face shape
3. by Merge Layers (ctrl + e), the use of cutting tools so that the screen contains the new combination, cut off the more part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. yellow - 40, -20, -30, -80. white -0,0,I transformed a metropolis of folk!,0, -50. intermediate colors -0, -5, -5, -5
5. by curve (ctrl + m) adjust overall color, RGB full outlet - output 214, input 174 and blue outlet - output 131, input 124,
6. Image - Adjust - Color Balance (ctrl + b), the shadow -10,0, +15. Highlight - 10,0, +2.
7. With a seal tool to evenly cover the skin around the mouth,
8. With a pen to circle dark bags under the eyes and face, the emergence of 60, the curve to lighten the constituency Dodge bags under the eyes and reduce the expression of facial muscles do not relax,
9. continued emergence of 60 constituencies, the curve lightening, the face, full point, output 146, input 113.
10. the high part of the circle of light out, feathering 60
11. curve of lightening, the face, full point, output 138, input 118.
12. eyebrows, the eyebrows and top of the circle with the skin, the lasso tool, the emergence 5, copy the layer, the Duplicate the layer move down, in order to achieve eyebrow shaping effect, stamp eyebrow shaping, this must be very scrupulous
13. began to adjust the eyes, the Commission put out the eye part of the circle, copy layer
14. pen to circle the do eye shadow district, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow, color balance (middle intonation): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part of the Hue and Saturation: 0, -40,0
17. Circle the details of the basis of the upper eyelid eyelashes Department ahead the corner of lower eyelid 1 / 3, press DELETE key to delete the selection, the exposed high light-bit,
18. cancel some more eye shadow, plume 40
19. surround the details to the upper internal corner eyelid 1 / 2, press DELETE key to delete the selection, the exposed high light-bit
20. the eyes ring out, copy the layer, emergence 1, part of desaturation whites, piebald back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes after the curves adjustment layer of bright copy, pen brush back the first part of the left eye, showing some shadows, p>
23. remove the pupil part
24. with eyes the color curve adjustment, so that the same
25. plus look high light
26. circle the lips, emergence 2, Curves lips high light, adjust the lips Color
27. adjust the nose Liang Gaoguang, adjust shadow highlights
28. with the optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light): 0,2, -2.
30. liquefaction along the hair pull, combined with lens flare, light 182,35 mm converge,
31. Finally, insert a flash in the appropriate brush complete


1. sketched with a pen on the behind of a pinion shape,
2. in the new working catalogue into the path 1, double-click the work path.
3. the path into a selection (Alt + Enter), copy the layer, emergence 3 pixels,
4. filled with white, select the appropriate intensity of use of painting tools, apply the appropriate edge.
5. Duplicate the layer, filled with another color that can be told Layer 1, Layer Properties regulating transparency Oh,
6. in consensus with the method of making of a second in front of the wings, adjust the transparency of the right can black and white gradient adjustment layer and mask adjustment,
7. new layer and draw a circular selection using the brush circle in the constituency, then adjust the transparency,
8. Copy paste into the new background layer The Alpha-channel, in other places outside the top left corner of the black filling, use the Filter - Blur - Radial Blur: number 90, blur method: zoom,
9. Select Alpha channel (the channel holding down Ctrl), in Figure floor area new layer, fill light yellow,
10. with a pen generated beam way, the way into a selection, yellow and white gradient fill color,
11. adjust transparency, rub with the eraser at the bottom of the light is light becomes the normal,
12. People who sketched with a pen light in the path, the path into constituencies strokes with a painting in the edges, adjust transparency, combined with the eraser and smudge tool will achieve better results and cost more Several halo effect will be better -
-

1. to find a fold of the background, tow the photos will need to make the background layer, resize and harvest, border and background to make it mate,
2. Adjustment - Hue and Saturation, full size: saturated -35 degrees, brightness +10,
3. adjustment layers into a soft mode, the effect of the old photos out,
4. hue saturation, full size: 0, -80,0
5. Duplicate Layer, Hue and Saturation - color: 340,24,0
6. create a new layer on top, fill it with black,
7. Filter - Noise - Add Noise, increase in the age sense of the number of 25%, Gaussian delivery,
8. Mixed Mode to Multiply,
9. Image - Adjust - RP,
10. to remove the border of the mottled, Select the rectangle selection tool with the medial side of the border, DEL key to delete the profile part of the variegated,
11. clashes with the eraser tool around the assorted characters -
-

1. Duplicate the layer, into the channel, copy the red channel, a copy of the red channel curve adjustment, input 100, output 3,
2. with a brush or selection tool to fill the white figures and flowers,
3.Ctrl + click on the red copy to make it into a constituency, remove red copy of the return to the Layers panel,
4.Ctrl + C copy, Ctrl + V paste, figures and flowers matting completed,
5. Methods A: New Fill Layer, R = 255, G = 128, B = 173, the layer to color mode,
6. Method Two: saturation of coloring, the new hue saturation adjustment layer, colored to play in front of hook, Hue = 345, Saturation = 60, lightness = 0, the new curves adjustment layer, 237,255; 188,130
7. Method three: New color balance layer, the middle tone - Levels: +100 , -54, -20 / +100, -35, +43
Shadow - Levels: +11, -7, +3. New optional color adjustment layer, red: 0, +21, -23, -5. Magenta: -100, -45, +32, -1
8. gradient mapping application, new Gradient Map 1, the layer to Color -
-

1. Open the original image, duplicate the layer, filled with pure black, overlay mode.
2. New Hue and Saturation layers: Saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, shiny 0, the material 69, 0, exposure, environment 8,
6. chop, add text decoration -
-

1. Duplicate Layer, Filter - Blur - Radial Blur: number 71, blur method - zoom, quality - good,
2. create templates, struck a motorcar, then tarnish given ascend to dynamic wheel ,
3. Levels - optional colors. Add material, rendering the whole atmosphere, the details of adjustments made with the Dodge, the main diameter of 5, the hardness of the smallest -
-

1. in the RAW to adjust the brightness, contrast, etc., for arranging the foundation after the adjustments,
2. to connect the sky material, simple transparency, make the sky into the layer,
3. New Adjustment Layer optional colors - intermediate colors: +20, +6, +7, -4, perfect, a little water color uniform,
4. khaki color fill, opacity 54%, filled with dark blue color, opacity 61 %, fill deep purple, opacity 76%,
5. fine-tuning, high light and adjust the selection in the middle of the resulting mask, high-light selection method: Calculation - Source 1: The layers merge layers, gray channel, the source 2: The layers merge layers, gray channel, Multiply mixed, opacity 100%.
6. midtones selection method: Source 1: Merge layers, gray channel, the source 2: Merge layers, gray channel, Multiply mixed, opacity 100%.
7.RGB get inside the mask channel, with a curve adjustment, high light adjustment: the black box on the left in the penultimate line of the middle line, blue line to the cut point, the middle tone adjustment: Up to adjust some,
8. reflected light mask, lasso select constituency, emergence, overall provides bright,
9. boat debris depressed saturation, saturation: -36,
10. sharpening the overall -
-

1. Open the image replica the layer, Ctrl + Alt + ~, by constituency, emergence 3-5. bend brightens, approximately 18,0
2. Adjust levels: 25,1,20,245. Mongolia version of the chief characters and the details given rise to some
3. stamp on the characters to brighten the edge of the sharpening modified dermabrasion.
4. on the back layer for color balance, the middle notes: -12, -10, -13. high light: +8,0, -19.
5. back layer, into the LAB mode,
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%,
7. the application of the image on the new layer, layer: merge layers, soft mode, transparency, 100%,
8. adjustment layer to adjust the curve aboard the lightness channel, 5,0
9. on the LAB color image saturation, hue adjustment, full size: 0, +10,0. Yellow: 0, +35,0. Green: 0, +15,0. Red: 0, -20,0. Blue: +10, +30,0.
10. into Levels: 20,1.20 , 245. on the lightness channel to adjust the gradient in the mask with a round out at the main characters, and then brush clashes details.
11. stamped, return RGB color, the image is optional color options, red channel: 0,0,0, -30 given rise to the petals on the mask,
12. stamp, the new empty layer, sprinkling with white brush to increase effects of pen pressure. 100% hardness, spacing, +54% -
-

1. Duplicate the layer, soft light mode, the use of soft layers is optimized for
2.Ctrl + U hue saturation adjustment, the color of straw draw leaves, change the hue of the season has reached the transformation purpose, we need to feel the winter to find leaves hue, brightness adjustment will be the most light.
3. Note lightness tolerance under which the details of the slider, you can select constituencies reduced saturation, hue can also be used to amend transparency, here is the color range, closing duplicate the layer, with the background layer to color range.
4. constituencies and returned copy layer selected, emergence, for the selected part of the saturation of 0,
5. snow sensibility of the figures in the anti-choice, you can use the color range, you can also use the hue saturation, and finally add contrast, wiping out some clothes.
6. some little stiff snow, superimposed on the snow to be ambiguous, with the contrast in the copy layer selected, change the overlay mode, copy the layer bein the absnece of contrast,
7. the overall rate of a contrast with perspective about clashes between a colossal brush, not including diagrams, giving details of the sleet. -
-

1. Duplicate the layer, adjust brightness, contrast, down the combination,
2. into the LAB mode, choose the picture of the image, reckoned,
3. the layer mode to color, cover printed layers,
4. into the RGB channel, filled with black and blue channels to extract the green channel selection, will fill the selection with white,
5. Hue and Saturation, Red: +20, +1,0. cyan: -7, +26,0. other file does not move, the layer mode to color,
6. into the RGB channel, select the green channel selection, anti-choice, color balance adjustment layer, select midtones , values: -10, -6, +16. Shadow: +4, +5, -2. high light: -19, -26, -40
7. back layer, into the RGB channel, select the red channel constituency, copy, paste back to RGB mode, layer mode to color, select the adjustment layer curve, red channel: 173,193. Red channel: 58,56. Green Channel: 180,201. Green Channel: 53,58. Blue Channel: 55,62.
8. The layer mode to color, copy the layer, copy the map layer, the layer mode to brightness, transparency, 20%
9. Select the adjustment layer, hue saturation, blue: +5, -49, -2.
10. adjust the color balance adjustment layer, middle notes: -6,0, +3. Shadow: -7, +3, -1.
11. color balance, shadow: +4, +5 , -2. Shadow: +4, +5, -2. High light: -19, -26, -40.
12. Plus lightning effect. -
-

1. establish Hue Saturation adjustment layer, saturation -49,
2. to establish an optional color layer, red: -49,0, +7, -41. Yellow: 0,0,0 , -23
3. to establish the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26. White: 0,0, +46,0. Intermediate colors: 0,0, -6,0.
5. Optional color. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, clamor cutback, sharpening, drawing and simple to use tool to repair the knee close The blot,
7. plus secluded corners, making a heart-shaped selection, emergence, with the curve provides shine. -
-

1. Copy a layer into smart filter for the purpose of the filter effect can be adjusted
2. Filter - Render - Lighting Effects, all light sources, negate 17, Matte -25, plastic effect of 100, underexposure 32, negate 28,
3. New optional color adjustment layer, red: -100, -3,03,0. Yellow: -59, -6, -23, +1. Green: +9 , +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Intermediate colors: +16, -18, -18, -3. Black: 0,0,0, +28 -
-

1. slightly adjust color hurl, adjusting a rough tone, establish Levels Adjustment Layer, Levels all channels: 0,1.35,255. Levels of red channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. To establish the Hue / Saturation adjustment layer reduces the saturation of original, Full Figure saturation -30
3. to create a Photo Filter adjustment layer, the first step in the blue has bring an end to ... with this step to deep yellow, the concentration of 25%, mode mode, the original place where the dark darker, choose the Channels palette, hold down the ctrl points of red channel, get back to photos selection populate the black mask filter.
4. to establish an optional layer of color adjustments, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. The windows brighten the more, the establishment of the Hue / Saturation adjustment layer to part in the window and wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, to discriminate the characters and the surrounding environment, the set after the mask used in the large soft black brush to figure as the heart angle rub a bit on it. Levels +20, +20, +40, select midtones
7. establishing Levels adjustment layer, the first Ministry of dark and light common points out, the mask using the gradient tool to pull a black and white, black and white from the top right to bottom left corner of the gradient, to the right even now. Full channel 0,0.80,255
8. Add light, use the , the upper left corner a morsel dark, so add a mask to wipe out the upper left corner. Points of light, strength: 28, Focus 52, luster -100, materials 100, 17 exposure, environmental 32
9. Create a new layer back, look at light and dark contrast to enhance the establishment Levels adjustment layer in the mask gradient tool with black and white drawing, from the upper left to lower right corner of the black and white gradient, the upper right corner of the light is entirely dim the part of the mask with a white brush in the brush out, and then figure out from the mask in the brush. Levels all channels. Levels full channel: 0,0.80,255
10. Sharpening, a little dermabrasion, add the word to complete. -
-

1. New gray coating, with a curve to adjust the brightness, 152,124
2. cutout eyes and mouth, to be tensioned,
3. reduce the overall saturation, saturation -56
4. with a color overlay to the overall color of the proclivity,
5. conceal the hue and color overlay layers, and open way panel, copy the R channel,
6. Create a new layer paste and adjust the transparency with a color filter pattern -
-

1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to reduce the transparency of the original
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, hidden, back to the background layer,
5 . to the before selection by adjusting the high-light curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase, or an applicable adjustment to the color, brightness +4, contrast +7-
-

1. Open the original image, copy the layer, the image - adjust - to color
2. filter - Artistic Effects - Plastic packaging, according to reduce the transparency of the original
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer black and white constituencies, money becomes small eyes, hidden, back to the background layer,
5 . to the before selection by adjusting the high-light curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, increase, or an appropriate adjustment to the color, brightness +4, contrast +7-
-

1. Select the blue channel
2. channel mixer, anchor the
3. resurfacing, landscaping figure form.
4. to give human the skin and raiment with parameter default; use afterward the effect of blue, too need to use the
6. to the effect of step 6 are mixed mode to
8 ..
9. fine-tune the look or facial skin color, brightness, contrast, and some of the details.
10. produced as shown in the
12. to the
13. The -
-

1. Create a new layer, filled with yellow, overlay mode, numerical 247,240,197
2. Copy just the yellow layer, Linear Burn mode, the mask given rise to the yellow car, shirk car color through yellow,
3. adjust brightness, contrast, high light color and exposure of part of the normal subject, brightness -20, contrast +64, the new adjustment layer saturation, saturation -31. to determine the last brightness of the daylight to high light at the color and detail preponderate in the dark can be ignored,
4. Duplicate the background layer the shadow highlight adjustment, the best place to shadow elaborate as the base, shadow: the number 100, color length 33, radius of 102, high light: the number of 0, hue width 50, radius 30, to adjust: +20 color amendment, contrast adjustment among 0 and 0.01% of the construction of black, pearly construction 0.01%
5. Duplicate the background layer to adjust the sky brightness, with the layer to make up the sky over exposure deficiencies,
6. tuning the details, to erase the sky wires, repair, Clone brush will do,
7. Flatten image, fine-tuning the details, sharpness -
-

1. buckle out of persona, adjusting photo color, contrast and extravagant attention to the photo did not make light of the thighs in area need to be adjusted
2. adjustment of skin color, clothes color, primarily used to adjust the layer , then add the background material, reflection, etc., disburse attention to little feet down the extend distortion is used Free Transform to adjust drip
3. in the legs add a little high light, high light pen location outline, fill Gaussian white --- Fuzzy --- reduce transparency can also be filled with 50% gray pattern of the new soft layer --- --- Dodge tool used to draw roads guide to Rome, can easily reach the destination can
4 . material, the text with a click, the final sharpening can -
-
-
-1. the picture opens, find some form similar to the chateau.
2. ambition be discounted from the house and put a new layer. You can use the Polygonal Lasso tool to select housing, and through a relatively soft eraser tool to erase the background.
3. immediately need a new background, from the material library to elect a
4. the sky into the rear of the house (climate layer into the housing layer beneath), and join a tiny outlook distortion effects of the sky to increase the depth of the background.
5. inspect the brim of the house, there still remain some of the original color of the sky upon.
6. with the magic wand select the regional housing floor space, and then do Select> Modify> Expand command to expand the range of options, enter an appropriate value of the selection to include the need for color correction house edge. Executive Image> Adjust> Hue / Saturation command to adjust the color of the edge of the roof the same color.
7. continue to use the Hue / Saturation to adjust the housing and the color of the sky to enable them to coordinate feasible integration.
8. will must remove the palm trees next to the house, with the copy stamp tool to copy the house to draw tiles between the part of the floor and first floor.
9. add to a bolt of lightning added to the shade traction. No feathering effect using the brush to draw a lock of lightning, copied to a new layer, add the flicker effect. Then use the Dodge tool to highlight the roots of lightning clouds.
10. using hand-drawn pictures or nigh the house to add some die tree, remember to adjust the color and brightness.
11. To make the house look more worn, painted on the roof of a cavity.
12. Continue to add the effect of damage. Broken beams and aqueduct, to break dissimilar roof and cup. To crash asset and then copy the stamp tool to use to fill the place vacated
13. Add some stains. First, the skylights, with an random brush to add some variegated glass. Then change the layer blend mode stain it with a good glass can be mixed together. I used this tutorial brightness mode.
14. on the whole house to reiterate the same treads, using a little deeper color and blend mode set to overlay mode. Attention to seams and edges, this place is the most disposed to stains.
15. portico amplified detail.

1. into the channel panel, and then use the
Channel Green - Mixed Multiply, opacity 20%
channel red - miscellaneous black, opacity 100%
2. adjustments - color balance - high gloss - Levels: -8, +13, +11
3. blue channel during the 1st application image, layers: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, migrate the top right of the red channel a little bit, br> All channels 6,0 and blue channels 4,15
5. Copy a layer copy of the out of the blue channel of the action again, mixed Multiply, opacity 50%
6. The last thing is prominent figures, and with the eraser, given rise to some people, pay attention to the appropriate lower transparency. -
-

1, this effect can be instantly transferred with curves out over the whole channel is about 1 / 4 grid,
-105.125 green channel, blue channel 151.254
2. with lens correction to add black borders. Add Noise which Vignette - the number of -28 (dark), the focus +5,
3. with brush tool on the Internet below the pen of a scratch in the above picture and then press Merge Layers
4. Add Noise, Quantity -2.45
5. to make a side -
-
-
-1. Duplicate the layer blend mode to Screen,
2. Coated 2 eyes mask reverse clashes
3. back (alt + ctrl + shift + E)
4. channel mixtures, select the color, red +54, Green +54, Blue +32
6. Mixed Mode - are stacked
7. on the back layer to adjust the image - adjustment - Shadow / high light - Shadow: 50,50,144
high light: 0,50,30
Midtones: 20,0
0.01,0.01
8. again back
9. wipe away the right cheek with the stamp of the sun
10. with the Dodge tool - the range of high light intensity of 50%, given rise to the eye reflection, only rub the eye black,
14. for a long time less saturated red hue, or other fine-tuning to attempt

1. Duplicate the layer, the overall provides bright, curved top right,
2. with a selection tool to circle the neb and fixes, and then brightens with curves to highlight the nostril and nails
3. color balance - high light - Levels: +8,0, -22
midtones - Levels: -10, +29, +27
Shadow - Levels: -2, -3, +14
4, can be Select Color - Red: 0, +1, +23, -29
Available colors - Yellow: 0,0, +4, +28
5. adjust the affected skin, a little pressure dark colors
6. with a curve to highlight the texture of the tank pressure of dark, black is the mask, the mask with an adjustment with a good general amend one o'clock
7. brighten the overall color, top right of the curve,
8. Finally is a revision of the lips,
9. add text -
-
-
-
1. use the
2. using ctrl + I RP operation:
3. Levels using ctrl + L to adjust values ​​for [145,1.5,160]
4. transferred into the general layer, after a new blank layer and fill it with black on the bottom.
5. using ctrl + T to free transform, the use of perspective.
6. duplicate this layer, and use the free transform the vertical flip.
7. aline the 2 layers, and interlock attach.
8. use the Free Transform to adjust the zoom feature of elevation.
9. use the color filter


must remember that 20 species of PS technology! ! ! The United States will not do your photos! ! !

a simple digital photo mending
1 open late pictures, favor the implementation of color / saturation (-40) to reduce saturation.
2 new layer, the layer mode to soft light, with the brush tool will need to luster the part of the painting several periods, where you can easily extract the color palette used
3 pictures soft color transition is insufficient, then about the implementation of the emulating Gaussian blur filter (+85)


simple with photos came to light less than
1 Open the image, copy the background layer, change the background color filter layer pattern
2 Levels of the background layer to adjust

30 秒 get Plmm elegant photos
1 Open the picture, copy the background layer double
2 for reproducing the background layer a Gaussian Blur (radius 4 to 6), copy the background layer to the second mode of light
3 new layer, add filling pattern (half of pre-defined gray well and half white horizontal stripe pattern), set Mixed Mode to Multiply

image dislocation effects
1 Open the picture, a new layer, select the View - the potentate, select the move tool, respectively, from the top and bottom drag out two blue marking (9 cell)
2 using rectangular selection tool, fill the carton (dark gray 1,9, 5,7 black, 3 light gray) to psd format, and then close the file
3 implementation filter - distort - the replacement, select the save psd file
Notes (the corresponding image pixel to the left and ascent; black (color value = 255) is the largest positive transmission, that is the corresponding image pixel to the right and down; gray (color value = 128) does not generate displacement )

shading effects
1 Open the photo image, Select - Select All, then Edit - Copy, establish a new channel, Edit - Paste to paste the copied images into the new channel ]
2 implementation of the image - adjustment - Anti-like, back to RGB channel, amend - remove, delete the original image
3 to Select - Load Selection, call the new channel, Executive Editor - fill (the color )

atomization
1 Open the picture, a new layer, set foreground / background color (black / white), to Filter - Render - Clouds, add a layer the layer Repeat masking
2 filter - render - clouds, image - adjust - brightness / contrast (80,0, a mode to color filter layer)

People illustrator effects

1 Open the image, copy the background layer, the implementation of the image - adjustment - Channel Mixer (Gray, +30, +60, +10, monochrome), to Filter - Stylize - Find edges, remove the noise
2 Levels of merged mode to , +155) the implementation of form, color image communist
4 - adjustment - optional color, fine-tuning of color (red, 0, +100, +100, -75; yellow, 0, -40, +100, - 40)

old photos using the color overlay to add light and color effects
1 Open the image, copy the background layer, the implementation of the image - adjust - to color, adjust brightness / contrast (-42, +18 )
2 Add Halo (brightness +100)
4 Duplicate the background layer, additional again,
1 Open the picture and copy of a The layers in the replication of a mouse, the sky turned blue

dispose selected according to the misty Art
1. copy an original layer (Ctrl + J).
2. Gaussian blur on the copied layer Filter (+4.0).
3. do color adjustments (+50,0, -64)
4. wipe with a soft-edge eraser explicit need fhardly everme.
5. the appropriate use of Figure mixed layer.

create hazy in bright (landscape, ecological type)
1 Open the image, copy the layer.
2 copies of the layer blending mode to reducing the transparency.

a photo to add a glass effect
1 selected area, press Ctrl + J
2 Gaussian blur on the shear layer (+3.1 pixels).
3 to adjust color balance (-39, +29, +16).
4 new layer. Choose the thickness of the glass district add a custom gradient filling (black and white gray, the mandate is dark, glossy, dark, high light), press Ctrl + T on the constituency to adjust the thickness of the glass.
5 filter - distort - Glass , select your preference pattern (distortion,Then a wrong chilly, it ambition be OKAY ! !, smoothness of 1, zoom 50%).

burning paper effect of the old photos - PS treatment $
1 pure open a picture, the implementation of image - Adjustments - Hue / Saturation (+1, -58, +1).
2 Image - Adjustment - change (mid-tones, deepen yellow, deeper red highlights).
3 Duplicate the background layer, Go to Filter - Texture - particles (9,56, vertical).
4 new layer, the implementation of the filter - Render - Clouds.
5 and run the image - adjust - brightness / contrast (+27, +100).
6 with the Magic Wand, select 1 layer of black constituency.
7 off layer of a preview, click Copy the background layer, the foreground color to dark brown.
8 to Select - Modify - Expand (5 pixels), select - Feather (5 pixels)
9 Edit - Fill (foreground), the selected layer one, with the wizardry rod select the background of black constituency
10 off layers and layers of a preview, copy the background layer selected, Executive Editor - Clear.
11 image - canvas size, height / width of one centimeter was increased, positioning (in).
12 opened the background layer preview, select the background layer and fill the foreground color (light brown).
13 Duplicate the background layer selected, do Layer - Layer Style - projection. (positive end laminations, 45% opacity, angle 45, from 7 to inflate 2%, size 10).
14 mix all layers.

Art mottled effect of another system of decree
1 border to create a new file key fill background by D White
2 Next, filters --- --- rendering clouds.
3 CTRL + M to adjust under the curve (high contrast black and white).
4 After completion of the effect of further next filter - distort - Glass (7 Distortion, smoothness, 3, texture - canvas, zoom 50%).
6 Create a new layer, the background is black, the other a new layer, add ample white rectangle.
7 located in the rectangular layer on the implementation of filter - distort - replacement, select the default option. Then find the newly saved PSD file can be replaced.

PS rendering the atmosphere of your photos (landscape)
1 Image - Adjust - Levels (RGB +29,1.0, +234) . form, color Doctrine l2wvg.V 'T @ 4I
2 implementation of the Hue / Saturation directive (full size -14, +41, -1).
3 persist to Hue / Saturation (red, hue value decreased , saturation increase).
4 continue the hue / saturation (yellow, -22, +45, -1). www.swcool.commDZ-u
5 continue to Hue / Saturation (green, + 15,0,0).
6 adjust the brightness / contrast (brightness decrease / increase contrast). Xingse doctrine (H {T2P4ccN

uncomplicated and accessible limn achieve

1 Open the picture, do apt the color, adjust sunlight / contrast (brightness diminish / increase compare).
2 Duplicate the background layer (Ctrl + J), select the background layer, the implementation of Filter - Style - find the edge, then the UXXXXX sharpening, then
layer mode to Overlay.
3 new layer, fill the white, add noise, then the film blur, the layer mode to Multiply.
4 rubber tools (opacity to 15%), wipe some of the high light.

strokes drawn sketch effects
1 Open an image,Christian Louboutin Sandals, Duplicate the background layer, select Layer 1 copy to Filter - Blur - Gaussian blur (2.0 pixel)
2 Duplicate the background layer again, select Duplicate Layer 2, the implementation of the filter - sketch - watercolor pen ( 20,60,80), the layer blending mode to darken.
3 Duplicate the background layer repeatedly, select Duplicate Layer 3, the foreground color to red, to Filter - Sketch - Sticky Notes ( 25,7,10), opacity set to 30%.
4 Duplicate the background layer again, select Duplicate Layer 4, the foreground color set to black, foreground / background color set to black / white, and the implementation of Filter - Sketch - Photocopy (1,50), the Executive Levels adjustment (RGB, 157, .0,159), filled with the value of 30%.

simple way to do special photos
1 Open a picture.
2 selected the blue channel in the channel, and then in the blue channel to Filter - Stylize - overexposed, you can point back to the RGB channel.

Matrix effects
1. Create a size of 500X300, RGB mode, the white background periodical.
2. with a text input tool for channeling 01 randomly enter a code, reception CTRL + T to put it over the perpendicular rotation, and a few multi-copy a pull into the range size, placed at random a few. Another means is to use filters, you can accomplish quite good results. Is the list - Filter - Texture - particles, the intensity and contrast are adjusted to 100, mote type selection vertically on it.
3. To those 01 code all the text layer and merge the background layer, and the foreground color set to R: 100, G: 255, B: 0 hardly ever green, the background color set to black.
4 Select Menu - Filter - neon light effect, shining size set to 10, brightness to 15.
5. Select Menu - Filter - Stylize - light edge, the edge width is set to 1, the brightness set to 20, about the smoothness set to 1.
6. Select the menu - Image - Adjust - Brightness / Contrast , the brightness to -10, the contrast adjusted to about 60

Ps The rinsing process is used to flush negative slides, it would be relatively curious and amusing colors. If the MM portrait photograph, will make even filled with a decadent decadent avant-garde colors.
1 Open the image, and let the right shows channel, into the channel, into the channel, into the Select like the panel selected the red channel, into the .
8 control plate in the channel entire the RGB channel selected, go to all the RGB channel selected, go to