Phone password apt release always the course , do

[transfer] machine lock phone friends did not have to release the operating chamber, get solutions of their own phone lock: * 2767 * 2878 # / * 2767 * 7377 #
Samsung chip reset: * 2767 * 3855 # Solutions can also be used to latch or card latch
machine Samsung display temperature, battery capacity: * # 0228 #
Samsung display contrast adjustment: * # 0523 #
Samsung software version: * # 9999 #
Samsung A100-A188 look version: * # 0837 #
Solutions Motorola T2688 all the locks: 19980722
T2688/2988/988d no Chinese: * # 0000 # OKAY (card)
Motorola always machines lock: Press MENU +5 +1 / 2
Siemens reinstate the factory settings: * # 9999 #
Siemens promiscuous text back to the Chinese: * # 0000 # / * # 0086 #
Siemens software version: * # 06 # Left
Ericsson old machine back to English: * # 0000 #
Ericsson new helicopter back to English: Press CLR-left -0000-- right
Ericsson showing vegetation * of: right, *, left, left, * left, * key
Nokia showing factory * Period: * # 0000 # (card)
30% of electricity Nokia Province: * # 746025625 #
Philips forced re-networking: * # 2562 * #
Philips Display and change the phone password: * # 7489 * #
Bosch (BOSCH) 909S back to the Chinese: * # 0852 #
Bosch (BOSCH) 909s behind to English: * # 0851 #
NEC was software version: * # 2820 #
NEC restore factory settings: * # 73738 #
Bird s1000 :*#*# 1705 #
invisible features to unlock :*#*# Bird s1000 1705 # 46 (also used for 999D, 720)
such for breaks and then --- 24681357 (or fair use it to solution)
waveguide 8xx/9xx Series: * # 7-14-bit serial number + #
SIM card serial number adviser to remove the last nine OT221/220 last
Alcatel unlock: 25228352/ALCATEL + D
Alcatel OT301/302 unlock: 83227423
Alcatel OT500 / 700 Unlock: 25228352
Konka: * # 0001 # * # 1001 # # # 1001 #
Konka sleet 5219: # 8879576 # source: 1234
GVC: * # 1001 * (Haier)
Soutec boot type # 320 # 1001 # and then accompany the card to 0000 OK
Mitsubishi NET LOCK: * 787090 or * 787292
Mitsubishi IMSI LOCK: * 362628 or * 360608
Mitsubishi NETSUB LOCK: * 476989
Mitsubishi CP LOCK: * 482896 or * 480896
Mitsubishi SP LOCK: * 967678
Mitsubishi EXT LOCK: * 574243

Cheats
Philips Mobile phone prevalent stand state, enter the following key combinations:
* # 06 # View IME string of code
* # 2254 * # display status line
* # 2255 * # corner aboard or off (DEBUG CALL) mode
* # 2558 * # show call time
* # 2562 * # compelled to re-connect to the network system
* # 7489 * # show and change the phone password
* # 7378 * # SIM cards display some information, such as phase (phaselevel)
* # 3377 * # SIM card to read information,Lacoste Observe Strap Trainers, initialization and apparent
* # 7693 * # qualify or maim sleep mode
* # 8463 * # sleep mode to read information
* # 337 * # EFR mode on / off
* # 4764 * # single frequency / frequency settings (switching single-frequency GSM900)
* # 4765 * # single frequency / frequency settings (single-frequency switching GSM1800)
* # 4762 * # unattached frequency / frequency settings (switch to dual mode)

Alcatel (ALCATEL) test key
in standby mode,Womens Lacoste Shua Trainers, enter monitoring network status, including signal strength and the use of the channels.

NEC DB2000 phones Cheats Enter the emulating keys in the standby:



Samsung earlier version of the phone, you can enter the following command all the testing status:
test feature key code / name
* # 9999 # exhibit the call software edition number
* 2767 * 2878 # phone reset the current settings (unlock the phone)
* 2767 * 3855 # phone EEPROM General reset (repair software mistake)
* # 9998 * 228 # Battery parameters read
* # 9998 * 289 # ringing marker frequency test
* # 9998 * 246 # program parameter display
* # 9998 * 364 # WATCHDOG signal test
* # 9998 * 377 # EEPROM Error display
* # 9998 * 427 # WATCHDOG signal path set
* 9998 * 523 # LCD compare correction
* 9998 * 636 # storeroom status display
* 9998 * 786 # The current *, time to read
* 9998 * 842 # Test Vibrator
* 9998 * 947 # reset the settings in the major fault
* 9998 * 9266 # show arranged to receive the channel number and arranged to receive current strength
Samsung mobile phone (Samsung 600 new from the starting) of the support the rebate of a number of test commands, essentially leaving only the following can be successful:
* 2767 * 2878 # (EEPROM reset)
* 2767 * 3855 # (EEPROM total reset, IMEI may convert as the initial code)
* # 9999 # (retard version)
* # 0523 # (intonation LCD contrast)
* 2767 * 7377 # (phone password reset instructions Solutions)
of special note * # 0523 # to enter, and some models of mobile phones to the card, some do not. In increase, if entered successfully once, and then enter the failures is due to memory efficacy on the cell phone software, cell phone battery you can try removing Zhongzhuang on the input (case in point: * 2767 * 3855 # command input, periodically it does not reinstall the battery, the phone can not boot.)
Samsung SGH-N288 phone test instructions
* # 0001 # Display RS232 serial communication parameters
* # 0228 # Display battery capability, voltage and temperature
* # 0246 # program parameter display
* # 0324 # Network testing (engineering mode)
* # 0364 # Display Watchdog state, you can adjust
* # 0377 # EEPROM error display
* # 0427 # WATCHDOG signal way set
* # 0523 # adjust the contrast, careful modification;
* # 0636 # Memory capacity display
* # 0746 # SIM card document description test
* # 0778 # SIM card information
* # 0786 # display content-based second boot time and after this start to the current time is long. Press - long.
* # 0837 # display careful version of the software
* # 0842 # Vibration test
* # 0947 # Reset in case of major error set direction
* # 9999 # Display Software Version
* 2767 * 2878 # EEPROM reset, set the phone to absolute clearance, can be used to unlock
* 2767 * 3855 # Remove the procedure from the font EEPROM reset to factory values. IMEI code of the modified compartment phone, use this command restore the original factory serial number. This command namely also used for EEPROM (chip) among the program disturbance reasoned by the failure. Chinese Machine Cheats

Siemens
open to the public input [* # 06 #], to see IMEI (International Mobile Equipment Identity) code.
enter [* # 06 #] + [left softkey], to see the software version number. Above do not need to insert the SIM card is also operational.
enter [* # 0000 #] + [launch key],New Lacoste Trainers High Top, change the default language (English?).
enter [* # 0001 #] + [launch key], into English.
enter [* # 0086 #] + [launch key], into Simplified Chinese display.
enter [* # 0886 #] + [launch opener],Lacoste Arixia FD Trainers, change in Traditional Chinese.
shortcuts
press[*], to open or near the ring.
press [#], open or close the keyboard lock.
press [left side button] to open the profile settings.
Press [on the left under the button] to open the language dial.
press [right side of the recording key], play the recorded sound can be played at anybody time, including the call, the call to listen either sides.
Press [right side of the record button] to start recording until the release, or 20 seconds is up.
when using the keyboard lock, you can press [end key] temporarily open radiant lighting.
twice [Telephone Directory] to enter the VIP phonebook.
[1] + [launch key] to access voice send (within the [Menu → → voice mail text messages] to set voice mail number).
[0] + [left softkey] to mow 1, 2 lines (as if most of the zones do not support, including Zhuhai).
[number key ]+[#] SIM card can show the subsistence of the catalogue name of the location (catered namely at fewest in the SIM card to store a phone).
reception [0] + word appears, and can be left soft key to elect the citizen long-distance code (place planned at the English name.)
shortcut keys settings: [number key] → [left softkey] → [right softkey] (change) This will be the discretion, select to (whether the chosen phone number, then enter the phone paperback discretion To fast launch the phone name)
use [number key] → [launch button] can be. Siemens

locking unlocking method to unlock the users you need, will unlock code in the boot state directly into mobile phones, and then await for auto-unlock time about ranging from 1-60 seconds to heave the

★ PIN code
Motorola phone when you are not detailed to set the PIN forgotten, all butmeone another set up your phone PIN, etc., when the PUK on a big aid. In the bad PIN three times will be displayed on the phone behind the SIM card is locked, then you have to pass to unlock the PUK. 8-digit PUK code is normally in the back of calories, if only, then as presently as possible to the regional cry heart inquiries, must not be transport muddle, as merely 10 times the wrong PUK opportunities, the wrong SIM card 10 is reimbursement. Motorola generally enter the PUK must be entered before ** 05 * Zaishu PUK, the format is consist in ...: ** 05 * PUK can be. Motorola's cardinal
★ Clear and Master Reset
Motorola cell phone, whether you do any settings, resulting in such as: not normally pluck into the pull, caller ID, garbled, or can not remove the phone book, etc. , you can recover the following path.
MENU button +5 +1 (2) shade will display
2, clear the last outgoing number and the last incoming number.
3, can be clear time-table.

but can not remove the traits are: a nailed number of tables, the element number table, billing statement, received and outgoing text messages.
select master reset, will execute the following:
1, return to the original language of choice.
2, re-tones for the recovery of standard volume, the network is to detect the frequency of retrieval, the abolition of automatic rejoinder, voice prompts dollars display when the call billing, energy-saving, automatic hands-free, automatic locking, cell broadcast and fax calls.
★ unlock
T2688 Motorola T2688 keyboard with the keyboard unlocked,Lacoste Trainers 2011, simply enter: 19980722 then, yet it only assists the current card solution Suo, reset the whole phone can not be achieved.
★ MOTOROLA GSM handset testing instructions to enter the state of
test:
insertion test mobile phone SIM card to open the power, when the internal Automatic .
3 seconds the phone displays into the PA calibration chart, similar to the ETACS 72 # command
07 #: Close Rx Audio channel
08 #: Open Rx Audio aisle
09 #: off Tx Audio channel
10 #: Open Tx Audio channel
11ABC #: Set channel ABC = 000 ~ 124
12AB #: set power class class AB = 00 ~ 15
19 #: Show Call Processhardly everftware version
20 #: show modem software version
22 #: show voice codec software version
82 #: U801 discern the version number
24A #: Set AGC step A = 0 or 1
25ABC #: continuous The AGC is set to ABC, ABC = 0 ~ 255
26ABCD #: AFC will be a continuous set ABCD, ABCD = 0 ~ 4095
31A #: set the time slot for the A,Womens Lacoste Trainers, A = 0 ~ 7
33ABC #: single-step capture the ABC channel
36 #: open the audio circulate
37 #: abort test
38 #: refresh the SIM card
39 #: the SIM card failure
40 # : launch all
46 #: Displays the current AFC DAC value
47A #: Set the volume A = 0 ~ 7
490 #: read lithium information
57 #: Clear to maintain memories, the equivalent of 32 ETACS # directive
58ABCDEF #: Set the security code to ABCDEF
59ABCD #: display / change unlock code
60 #: Show IMEI (International Mobile Equipment Identity)
65 #: Show IMSI
7100 #: Mobile self-test, 03,04 as Modem IC error, 05,06 as SpeechCode IC error,
07 necessitated for the transfer card, software errors, 08 because the phone usually, 00,01 for the CPU mistake.

Cheats
◆ Display Philips mobile phone IMEI number: * # 06 #
◆ Display the status line * # 2254 * #: C, BS, RR, MMI, CREAT.
◆ activate or deactivate the debug call (DEBUG CALL) mode * # 2255 * #
◆ Display the total talk time * # 2558 * #
◆ forced to re-access the network * # 2562 * #
◆ display and change the phone security code * # 7489 * #
◆ show some SIM card information, such as phase level (phase level) * # 7378 * #
◆ SIM card lock way to information, initialization and VI * # 3377 * #
◆ activate and turn off slumber mode * # 7693 * # ◆ slumber mode to get the information * # 8463 * #