1. Measure the distance from the ceiling to the edge of a blade with a yardstick (most blades are angled, so be sure to measure on the same side of all the blades). Hold the yardstick still and rotate the blades around to measure the other blades.
Turn the fan on to see if it spins smoothly. If it still wobbles,
franklin et marshall, pick up a blade balancing kit ($1.50) from a hardware store or home center. The balancing clip will balance the fan blades, eliminating the wobble.
Click image to enlarge.
2. Slide the balancing clip on the trailing edge of any blade,
franklin and marshall, halfway between the holder and tip. Run the fan to check the wobble. Repeat with each blade, noting which one most reduced the wobble, then slide the clip in small increments away from the center of that blade. Move the clip, operate the fan,
franklin marshall, then move it again until you eliminate as much wobble as possible.
If your ceiling fan wobbles and makes more racket than an unbalanced washing machine load,
polo ralph lauren pas cher, read on—we’ve got the fix for you. Ceiling fan wobble is caused by imbalances in the fan blades or blade holders, misalignment of blades,
ralph lauren pas cher, excess dust accumulation or just loose blade holder mounting screws. Restore your fan to its smooth-running days of old before you wear down the moving parts.
Photo 2 shows how to attach the balancing clip and pinpoint the wobble. Once you’ve found the best location for the clip, install a balancing weight on the blade as shown in Photo 3. Add more weight if needed to get a smooth-running fan.
Check blade alignment with a yardstick by measuring the distance from the edge of any blade to the ceiling (Photo 1), and make a note of the distance. Measure all the other blades in exactly the same manner. If any blade is out of alignment,
polo ralph lauren pas cher, gently bend the blade holder up or down until the blade is in line with the others.
3. Peel off the backing and stick the adhesive-backed balancing weight on the top center of the blade directly in line with the balancing clip.
First, make sure all the blades are tightly screwed into the blade holder,
polo ralph lauren, and the blade holder is firmly screwed into the fan flywheel. Remove any dust or buildup from the fan blades with a household cleaner. Run the fan to check the wobble and to dry the fan blades. If the wobble persists,
polo ralph lauren pas cher, one of the blades may be out of alignment.
相关的主题文章:
中标利率为1.9264%
After Copenhagen
建议投资者对此资讯谨慎判断