Office Home And Student 2010 Key Windows XP networ

cause Windows XP network neighborhood browse list is not correct or incomplete view of factors, need to prescribe the right medicine to solve the problem, and the diagnostic process in two steps: testing basic connectivity, file sharing to solve the problem.
one to solve basic connectivity problems.
1, check the physical connection between computers.
network connection card is the basic equipment, in the desktop computer in the back of each card should be a bright light, which means that the connection is normal. If you do not light, check the hub or switch is turned on, and each client is connected to bright light,Office Home And Student 2010 Key, which means that the link is normal. Then check whether the wire crystal head contact.
2, to ensure that all computers are installed TCP / IP, and is working.
installed by default in Windows XP, the TCP / IP. However, if a network problem to uninstall and reinstall TCP / IP is not easy: in the Uninstall button is unavailable (disabled).


Figure 1

This is because the Transmission Control Protocol / Internet Protocol (TCP / IP) stack is a Microsoft XP / 2003 of the core components, can not be removed . In this case, if you need to reinstall TCP / IP to enable TCP / IP stack back to its original state. You can use NetShell utility to reset the TCP / IP stack to make it back to the initial installation of the operating system state. Is: at the command prompt, type the following command, and then press the ENTER key: netsh int ip reset c: resetlog.txt, which, Resetlog.txt command results in the log file records, be sure to specify, specify here Resetlog.txt log file and full path. The results of running this command to remove and reinstall TCP / IP protocol has the same effect.
In addition, there will not be 95 people use it, WIN95 is not automatically installed by default TCP / IP protocol.
3, check the IP address

several situations:

View a different computer's IP is in the same context, is entered in the MSDOS mode IPCONFIG / ALL. If a computer receives the address in the 192.168.0.x range, and another address in the 169.254.xy received within the network topology need to determine which one is the correct address. Then, and focus on the wrong computer address the problem.
IP address on the 169.254.xy class

Internet connection in the case does not exist, or, each computer has a separate Internet connection (dial-up connection or broadband connection). In this configuration, the computer is usually assigned to their own range of IP addresses 169.254.xy (where x and y is a number between 1 and 254). The ISP provides the address for the Internet connection.
IP address on the 192.168.0.X class

a computer by using Internet Connection Sharing to connect to the shared Internet. This connection can be dial-up connection or broadband connection (typically xDSL or cable modem). The computer also known as proxy servers, a common agent has SYGATE, WINGATE, NAT, ISA, CCPROXY and so on. By the proxy server is usually responsible for other computers on the home network assigned IP address. Sharing computer connected connected to the home network should configure the network card IP address of 192.168.0.1. The address of other computers on the network should be in the range 192.168.0.x (where x is a number between 2 and 254). Of course, you can modify the IP address after a successful share, such as 10.XYZ and so on.
computer is connected to a hub, and hub and Internet connection through a broadband connection. This configuration is also known as borderless network. In this configuration, each computer in the home network has an Internet service provider (ISP) to provide the IP address. The address used by ISP to another. No border network is a special case. In this case, you should use ICF, but must take other measures to enable the connection in the home network.
4, use the ping command to test the network connection between two computers:

ping other computers IP, at the command prompt, type ping xxxx (where xxxx is another computer's IP address), and then press ENTER. You should see a few from another computer responses,Office Pro, such as:

Reply from xxxx: bytes = 32 time network security important, it is best to open the network firewall, but firewall blocking the normal Web browsing service communication, the result is people do not see in My Network Places on your computer, is there a way out in the open under the premise of the firewall to allow browsing services. way, if turned on ICF,Windows 7 sale, open the properties, in the service this column, select Add to add services to a total of four edit dialog box, the top is to describe the service name for the memory, the second from top to bottom one is the application of the service IP address or name, enter 127.0.0.1, said the machine. Here is the inside and outside with a port number, next to the tcp / udp udp port is labeled in this connection or tcp connection.



input in accordance with the form below 3 service

name protocol port

NetBIOS Name Service UDP 137

NetBIOS Datagram Service UDP 138
NetBIOS Session Service TCP 139

137/UDP - NetBIOS name server, network basic input / output system (NetBIOS) Name Server (NBNS) protocol is TCP / IP on a NetBIOS (NetBT) protocol suite as part of its name in the NetBIOS-based network to provide access to the host name and address mapping.

138/UDP - NetBIOS Datagram, NetBIOS datagram is a TCP / IP on a NetBIOS (NetBT) protocol family part of it used for network login and view.

139/TCP - NetBIOS Session service, NetBIOS session service TCP / IP on a NetBIOS (NetBT) protocol suite as part of it for Server Message Block (SMB), file sharing and printing.

Windows XP SP2 latest patches on the ICF done a lot of improvements, more powerful,Office 2010 Pro Key, ICF has its own set items after installing SP2 by default, enabled ICF firewall does not allow any external active connections, even if the application to the local access network also need to set the permission to do list.



Figure 9

7, canceled simple file sharing

Windows 2000 operating system, users set up folders in the shared property of operation is very simple, just right-click the folder with the mouse and select Properties to share the settings tab you can see. and system settings in the Windows XP shared folders are more complex when the user can not see the above procedure to share the Settings tab. specific changes are as follows: Open Mickey Mouse
for Windows XP Home Edition:

1. boot press versions of the same set share permissions of the.

8, set the username and password

the WinNT operating system kernel, when you access the remote computer, as if always the first to try the local the current user name and password to try, cause can not be accessed, where the user can add the password into the.



Figure 11

9, a variety of method of access name Click updated list of computers takes time, search the computer can speed up the update list. Click on name to open it.

method used to access the mapped drive into the MS-DOS mode, type If D. and then enter NET USE Z: IBMZB D? the computer IBM-ZB D mapping the shared folder as H: drive, at the command prompt, type on the.

10, check the RPC, Plug and Play service is started, check the appropriate system folder permissions, re-register the following dynamic link library:

regsvr32 netshell.dll

regsvr32 netcfgx.dll

regsvr32 netman.dll
NEW YORK Wen / Chen force