Driving skills because life [ Graphic ]

graphic driving skills, enough for a lifetime

Overview



driving rank and steering wheel grip



throttle, clutch, step on the foot brake the law



add file operation example



downshift operation to sample



right continuous left turn



consecutive start turning



essentials



Zhuangkao (site down library) line and down the order



library (all but libraries)



transfer library (binary two back) one beyond back



transfer library (binary two back) of the 2 back into the 2 designated parking



essentials



grab essentials



file file after the throttle of addition and subtraction with



details on the clutch the essentials (added)



uphill essentials



unattached (twice) line road

on the road in single line (or not department of the centerline of the two-lane road) to normal pedaling , the optimal driving position is navel of the road a bit more right, that is, the driver sitting in the center ahead to open road.

resolution

1, effortless to control direction: As the common road is bent on both sides of the intermediate high-low, in the right side when driving the vehicle to the right side line, then only left hand to gently stroke the steering cycle to the left with the freedom to live ambition be able to control the direction of the vehicle straight.

2, is favorable to overtaking vehicles and the intersection: the right-side driving, the vehicle can be at a puny angle towards the side of the road and the vehicle to perch.

3, to assist the traffic U-turn: one-way road with reference to the left, corner right.



single (double) right turn lane

1, vehicle line to deduct from about 30 meters away from the corner (or speed control) and left-moving vehicles tend to to reach the turn in the road turn right to reside enough difference in wheel width of guidelines in reaching the turn (the direction of play) to achieve optimal turning speed.

2, kick the right way according to the size of the turns, and reserve the (control), agreeable speed.

3, kneel close to the migrate finished: If front of the car, the vehicle towards the road can be, and if access control based ashore speed alternatively stop; if I were you to cars or obstacles before, you tin straight the vehicle to natural driving path behind affirmative; back to the direction of the turn ought be based ashore the size of mastering the appropriate measure in advance.

single (double) carriageway turn left

1, vehicle line to deduct from about 30 meters away from the corner (or speed control), and driving the right cars tend to reach the turn * close the road on the right (narrow) as the norm, reaching the turn (the direction of play) to achieve optimal turning speed.

2, according to the size to the left direction of turn, and keep the (control), good speed.

3, bend close to the transfer finished: If front of the car, the vehicle can move right back to the straight road, and access control based on whether speed or stop; if only to cars or obstacles ahead, you can vehicle instantly back to the normal driving routes are; back to the direction of the turn should be based on the size of mastering the proper amount in advance.



single (double) a continuous line of road turn

(example)

The figure is a right turn and then the 1st left turn after the small left turn consecutive turn road

1, vehicle line to cut corners almost 30 meters away from the corner (or control speed),Lacoste, and driving the right cars tend to reach the turn of the road on the right tight (alley) as the norm, In reaching the turn (the direction of activity) to attain optimal turning speed.

2, according to the size to the left direction of turn, and keep the (control) well.

3. when the vehicle is close to the end turn left turn, the time has been able to fully discern the road ahead is to turn right, turn the steering wheel should be properly in advance, when it approaches the right corner and leave ample in the road turn right feud in wheel width, spin the right direction, and keep the best turning speed.

4, when the right turn near the end when you turn,Lacoste Swerve Lace Trainers, then will be able to see in advance and a small left turn in front of a small left turn after the straight road conditions, the most common situations are the emulating two:

(a) of the road in front of a small left turn or go straight to the car: to turn right and the left light turn left necessities turn a small corner, small corner on the left when finished will be referred to advance the direction of rotation, the straight road at vehicles right side of the road, and pay care to the road ahead according to the situation preponderating at any time can cut down or stop.

(b) of the road in front of a small turn left or go straight to the car-free: the right turn will be completed, turn the steering wheel ahead, ignoring the small left turn, straight road directly toward the vehicle back to being normal driving route, and appropriate vehicle speed in advance.



stalls to dine because appending and subtraction and use

file (with file) elementary principles:

file with the appropriate speed and gear: from the most low-grade speed to the most high-end speed is to adapt the range of this file, if likely, avoid prolonged use of the lowest or the most high-end speed;

shift (plus, minus file): In principle, at all times the stall speed range to be able to shift, gear alternative to think the speed, power and economy;

tug files: less than most usually known as low-speed tug files, shuffle files incapable to make the vehicle, ran around, seriously will result in engine flameout;

upshift: When the vehicle reaches a high speed of a file, it should be implemented upshift, in general, high-speed car upshifts at the time of the engine stall speed of 3500-4500 rev / points;

reverse speeds: low speed when the speed near the stall, it should be implemented reverse gears, reverse gears timing of high-speed car should stall speed in the hands of this - in the low range, not the latest low The minimum speed in the file; reverse gears timing and power requirements should be based on the road to main;

the use of stalls under alter road conditions:

speed and file: Before moving into the normal speed, it should try to mushroom the speed of this file (corresponding to engine speed in lofty speed) in order to join files after the vehicle has sufficient dynamic; uphill in the implementation of this mushroom namely especially important when the document;

retain the dynamic gear: uphill driving and general road to adapt speeds,Lacoste Trainers UK, stall speed should be kept in the speed (engine speed escaping state), so that when the vehicle has enough impetus and speed can be adjusted extravaganza;

normal driving: normal driving, speed does not require many correction, cheap stall speed selection, in order to facilitate driving the economy;

downhill with file:

general non-hazardous downhill, can be properly linked to high gear, downhill resistance, haste is good, plus file operations can be carried out in advance, can be linked to high-grade oil;

long tilt with the afterward file: next long slope, in order to lest lengthened use of the brakes, resulting in reduced efficiency and brake failure,New Lacoste Trainers High Top, should be linked to the corresponding low-end, to embody the use of engine speed; with files without the need to master the principles of long-term use for the degree of braking deceleration;

... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...

shift operation: depresses the clutch pedal - quickly release the throttle - change the file to the required gear - According to file with the appropriate speed throttle (or without throttle), and quickly carried to the point of contact clutch semi-contact state - entirely flat and gently loosen the clutch pedal.

throttle and clutch with the throttle and the substantial training

with and referred to as the clutch with oil from the oil away with quickly and accurate driving operation play an important character in common have started shifting after the mate, ramp start, ramp to stop hanging, etc.

with fuel from 1 of two opener operation is in place and one clutch with the accelerator point of adjoin in location, place the throttle a little earlier than the point of contact should be in place, operating with the throttle a good general does no emerge vacant (sound) and After dragging the car pediment feeling.

throttle time on training: at large, medium and small oppression throttle tangle throttle and a one-time train prop, rub side under oppression ahead the direction of the direction of the reference value of the engine tachometer and engine sound;

clutch single point of contact in place operational training: first clutch foot in the end - slowly carried to the point of contact and hold the memories of this place - the clutch foot in the end and immediately carried back to its original position - repeatedly practicing the on action to be a one-time lift in place and feel a little car with dynamic subject.

oil from training with the operation: reception the accelerator when rubbing lift clutch - car sound a little dim when there is dynamic throttle, hold both feet. Practice to be able to easily and accurately manipulate appropriate.

speed control exercise (multi-start method)

multi-start method: the need for less than the initial file (commonly 2 files) maximum low-speed, you can use control the speed, you can control and safe to eat for muscular practical; the practical application of multi-start method is very important to use a quite broad range, such as: the city center district with the car, space vehicles, shifting, turning to detect an exactly point, practical reversing down libraries, before and after a short distance move, the busiest partition of a U-turn, and so on.

speed control training (multi-start means) operation:

multi-start method label suggests, is to start overlapping, the use of the inertia of the initial connection speed next start, repeat operation, low at the speed of traffic starting stalls purpose. Multi-start method start from the starting of the speed speed, merely its marrow is the use of speed inertia. Operation should be eminent that, for it was not truly finished off, to start the minimum speed or file corresponding to the initial throttle gear speed, so the clutch pedal during the operation can not be completely open, merely according to the process already started to achieve speed to take advantage of its inertia, inertia is required to use the clutch.

methods of operation: lift the clutch with the throttle to the point of contact - is expected to speed the inertia can be used, pressing from the combined release the throttle - stop or slow to fast speed anew with the throttle stop and lift the clutch to the contact Point - Repeat the above action;

when traffic is stop and go speed when needed, generally preferable to a repeat start file; when road conditions require slow speed quickly, generally, is fitting to do 2 files re-start;

multi-start method is correct, amenable use:

1, multi-start method according to the absences and semi-linkage (likewise understood as the clutch pressure) secondhand in association with the car and the ramp can be achieved can dwindle dress and friction clutch friction panel heat;

2,Lacoste Casual Trainers, the new side (or rear) are close to the position, the clutch using inertia, the feeling when there are security hazards, which can cover your brakes to assure vehicle safety;

3, a secure distance, one extension of the implementation of the initial speed, close to the target utilization rate of inertia, when the use of chronic (reduce the clutch) can be implemented by whichever time to appliance braking and vehicle steering.



immediately classified driver's copyright driver's authorization categories: A1, A2, A3, B1, B2, C1, C2, C3,Lacoste Swerve Keyline Trainers, C4, D, E, F, M, N, P, 15 categories

for driving and the code is consist in ...:

large passenger car

large passenger A1 A2 heavy tractor, entire linked to medium-sized, semi-trailer tractor-trailer

metropolis buses A3 kernel set of more than 10 medium-sized metropolis bus

B1 medium-sized passenger car passenger

large trucks B2 cumbersome, middling truck, etc.

C1 small car mini, mini passenger cars and other small automatic car C2

small, mini auto transmission traveler cars and other low-speed truck C3

speed truck (the original four wheel farm vehicles)

3 car C4 three-wheeled vehicles (the original 3 farm vehicles)

mediocre three-wheeled motorcycle engine displacement of more than 50ml of D three-wheeled motorcycle

E ordinary two motorcycle engine displacement of more than 50ml of the two

moped motorcycle engine displacement of less than equal to F 50ml motorcycle

wheeled vehicles on their own machine M Wheel mechanical car



streetcar trolley bus trolley bus N P tram

wish you study driving learning to help a friend.


Click to work to receive gold



[Featured] little-known Japanese birth of the documentary

social phenomena [Featured]

[recommended] friendship [

integrated graphics to enjoy a wide diversity of

suggested] [bags] life capabilities, the cardinal recommendation

[link] Pictures to enjoy amusement [Welcome]

emotional communication