Motorola AP5131 Wireless AP set the initial applic

Motorola of this wireless AP, or wireless router, which is the predecessor of the same character models, Motorola earned only after the change of a symbol LOGO and upgrade the firmware (the latest V2.2.0-001R) . AP5131 with industrial chart, powerful, symbol (Leaving alongside Motorola, he did not even compartment phones) in wireless applications, hardware and software design truly is first class. Although our company has deployed 10 AP5131, can I set up on the inside maximum of the tiny understood. As a pure AP application, some settings to share the experience with everybody. Motorola AP5131 default WAN port IP: 10.1.1.1, Subnet Mask: 255.0.0.0
setup steps:
1, enter the configuration interface before connecting to: POE power supply module, DATA & POWER OUT port connected to the AP's LAN port, PC network port with AP's WAN port, PC card IP is set to 10.1.1.X (X = 2 ~ 255)
2, PC-side install JAVA Virtual Machine (the Internet easily download and setup) , IE address bar, type 10.1.1.1, enter the login screen, USER: admin, PWS: motorola, requires you to change your password after entering.
3, enter, click on the System Configuration under the Quick Setup (cardinal settings are here.)
4, the right to change the ESSID, this is the list of wireless hot smudges that show the appoint of the patronize does not support Chinese names have not tried to set this interface in terms of plain English, it should not. After the first by following
5, the following is the WAN port and the LAN port settings, two types of configuration methods:
A, single-mode
this way, easy wiring, the use of POE power supply cable (What is POE, Baidu look at your own), fair a network cable. Drawback is that, in this way to create a wireless network surroundings,Ralph Lauren polo wholesale, keep up the client's IP address of the IP address of AP in the same network segment,Womens Nike Lunarglide, there are several wireless terminals must apportion several IP addresses. Our factory using a 192.168.0.X network segment, using this terminal IP address of wireless networking constantly conflict, of course, to fasten MAC and IP addresses this issue, and not within the scope of this article.
specific settings: AP's WAN port do not change, opening the LAN # 1 tab, This interface is set to use static IP Address (using the specified IP address), then the following IP address and subnet mask in accordance with the access network complete, there is the need to fill in gateways the gateway IP, DNS following the stuff, and pure AP application entity. Then, APPLY exit. After setting the application
routing: network access cable POE's LINE IN, POE's DATA & POWER OUT port connected to the AP's LAN port, WAN port vacant.
B, two-mode
this path two network wire wiring required, including a displacement network semaphore, the other is only responsible for electricity, of lesson, there are AP external power supply itself, the port, near the 220V power, then fittings can also be diluted using a special cable, merely this is the need to purchase accessories, and not for a direct cable Lagan extra economical.
using two-mode has the avail of wiring: LAN and WAN can be set to a another network segment, WAN LAN segment to use, and use different different LAN segment, this can save a lot of LAN IP address resources (effectively occupied at the wireless terminal)
characteristic settings: After entering the configuration interface, AP's WAN port first, do not alteration, opening the LAN # 1 tab, This interface set is a DHCP Server (as a DHCP waiter), then the following IP address, subnet disguise, and DHCP scope of the tangible need to fill out, such as the IP address to the box 192.168.10.1, subnet mask enter 255.255.255.0, DHCP range from 192.168.10.10 ~ 20, where the first gateway without changes. Then APPLY, exit. After PC, IP address to automatically get, with the AP's LAN side connection automatically obtain IP (you can use the HUB or alternate, only connect to AP and PC, AP With the on unattached connection), then enter the LAN side IP address of re-entering configuration interface, along to the upon instance ought be the input 192.168.10.1, then switch to the WAN tab, and enter the access network segment of the IP (eg 192.168.0.9) and subnet mask, switch to LAN # 1, there is also the doorway to This IP address, then, APPLY exit. After setting the application
routing: web access lines instantly joined AP's WAN port, POE's DATA & POWER OUT port interlocked to the AP's LAN port (merely responsible for electricity afford).
6, wireless terminal MAC address filtering (optional)
into the Network Configuration-Wireless-MU ACL,Womens Nike Lunar, first elect only an disc (DEFAULT), and then press on the EDIT, after entering into that option is set to DENY (allow catalogue, such as not understanding the txt to watch DENY back), then ADD the emulating to join the MAC address of the wireless terminal, and then APPLY exit.
Some rule of thumb:
A, two-lane connection is more settled than a single connection (wireless terminal MC3090).
B, AP5131 network roaming requirements: IP residences need to the same network segment, AP's ESSID namely set to the same.
C, skillful apt do so, AP attempt to put tall,Womens Nike Lunar Elite, so that the greater the scope place
.
相关的主题文章：


拒酒词

Ray comfort of a forum for users romance back .. LZ

十二星座最爱你的时候