Turbocharger failure mode analysis

,GHD Leopard Grain
turbocharger failure mode analysis
broke turbocharger main reasons the following five points:
1. foreign body
2. lubricants dirty
3. Insufficient grease or aging
4. use of poor quality or deterioration of the lubricant
5. use and poor maintenance


1. diplomatic body alien body damage to the compressor inlet face is sealing bad road , instantly into the air without filtration into the compressor impeller is not necessitated to replace the air filter cartridge upkeep or use of ######## foreign material into the turbocharger while the along foreign body airway was damaged road radial turbine cylinder diesel engine livelihood while there is damage to foreign parts anyone foreign material to enter into the exhaust various
will demolish the turbocharger rotor balancing, eventually leading to the rotor shaft stuck or broken.


2. lubricant dirty engine oil filters secondhand in non-compliance, or use minor filter use, the filter is the malfunction or engine main oil without the required filter is clogged supercharger oil change or for replacement of the pre-lubrication, the impurities into the oil pipe gasket sealant or debris into the lubricant aisle


3. Insufficient grease or oil change is not required to aging, or poor quality oil in a large load of work the engine suddenly shut down, do not idle the engine idling ahead scampering without turbocharger replacement for the sometime is not pre-lubricated or oil into the oil pipeline filter clogging oil pump failure, or the oil oppression is cheap


4. use of poor quality or deterioration of the lubricant

5.
use and poor maintenance in the use of driver and customary maintenance, the failure of the engine factory or automobile factory operating requirements,GHD IV Salon Straighteners, and clear the engine failure is not, leading to turbocharger damage. For example: begin the engine machine,GHD Hair, the work load additions now afterward a ponderous load of work and maintenance is not necessary to swiftly stop the engine intake system, lubrication system does not remove any leakage of the turbocharger
temperature

If the temperature ascend high enough quality lubricants will destroy down,GHD IV Styling Set, and out of sediment clogging oil pipeline. In increase, the sediments bearing surface wear, damage balancing,GHD IV Black Straighteners, and finally resulting in damage to the turbocharger.
common,GHD Straighteners, guide apt higher temperature causes: high oil temperature namely also high exhaust temperature peppery parking reiterated use of meager quality fuel atmosphere filter clogging.