Windows 7 License Illegal operation must master De

To facilitate inquiries, this does not make the paging processing.
one. Quit error number: 0x0000000A

Caption: IRQL-NOT-LESS-OR-EQUAL

the typical reasons: the driver employed an incorrect memory handle.

Remedy: Should you cannot login, then restart your laptop or computer. When the checklist of out there working technique, press the F8 important. In the Windows State-of-the-art Alternatives Menu screen, pick configuration any Windows updates or driver.

run by computer manufacturers to offer all the technique diagnostics software, in particular the memory examine.

disabled or Remove newly installed hardware (RAM , adapters, hard drives, modems, and so forth.), drivers or software program.

to make certain the hardware system drivers and method BIOS are the latest version.

guarantee the maker can help you whether the latest edition, may also help you get the hardware.

Disable BIOS memory solutions which include cache or a shadow.

2. Quit error number: 0x0000001E
Description Text: KMODE-EXPTION-NOT-HANDLED

the typical reasons: kernel-mode process tried to execute an illegal or unfamiliar processor instruction.

Remedy: Make certain there is adequate room, especially within the time for you to carry out a brand new installation.

if a Quit error message that a particular driver, then disable him. If you cannot commence the laptop or computer. need to attempt to commence with Secure Mode to eliminate or disable the driver.

If you have non-Microsoft supported video driver, attempt switching to the standard VGA driver or to give the proper driver for Windows.

disable any freshly set up driver.

make sure that the most recent edition with the technique BIOS. hardware producers to aid ascertain regardless of whether you've got the latest model,Office Professional Plus 2010, it is easy to also enable you to get him.

BIOS memory possibilities As an example, cache, shadow.

3. Quit error amount: 0x00000023 or 0x00000024

Caption: FAT-FILE-SYSTEM or MTFS-FILE-SYSTEM

usually Trigger: The difficulty occurs in Ntfs.sys (allowing the system to study and create NTFS driver driver file) in.

remedy: Run through the computer method producer diagnostic software, especially hardware diagnostic software.
disable or uninstall all anti-virus software program, disk defragmenter, or backup system.

the command prompt, run Chkdsk / f command to examine the tough drive is broken, and then restart personal computer.

4. Quit amount: 0x0000002E

Caption ATA-BUS-ERROR

the normal reasons: the technique memory parity error,Office 2010 Home And Business, ordinarily by hardware challenge brought on.

Solution: Remove all newly set up hardware (RAM. adapter. challenging. modem, and so on.).

run by computer program producers to offer diagnostic software program , especially the hardware diagnostic software program.

ensure that the hardware device drivers and technique BIOS would be the newest edition.

hardware suppliers to provide program diagnostics, run the memory check to locate fault or does not match the memory.

Disable BIOS memory options for example cache or possibly a shadow.

immediately after beginning the record of available working method, press F8. In the Windows Superior Options menu display screen , pick p>


5. Stop amount: 0x0000003F

Caption: NO-MOR-SYSTEM-PTES

the usual reasons: the correct of every clean-up yo driver.

Remedy: Disable or uninstall all anti-virus software, disk fragmentation or backup processing program.

6: Quit error quantity: 0x00000058


Caption: INACCESSI-BLE-BOOT-DEVICE

popular cause: initialize I / O program (typically refers to the boot system or file program) failed.
answer: boot sector viruses generally cause this Quit error. is the most recent edition of anti-virus software,Windows 7 Home Premium Product Key, examine your pc for viruses. If you ever find a virus, you must not appear to put into action the required supernatant was eliminated from his computer,Windows 7 Home Premium, see the antivirus software documentation for methods to carry out these actions.

eliminate all recently put in hardware (RAM, adapters, modems, and so forth.).

MIcrosoft check the Hardware Compatibility Checklist to make certain that all hardware and drivers are appropriate with Windows.

If you're employing appropriate SCSI adapter, on the market from hardware distributors in addition towards the most recent WINDOWS driver, disable the SCSI system Synchronous consultations, verify no matter whether the end from the SCSI chain and matching gadget SCSI ID, if not positive ways to do to these steps, refer to the documentation of hardware units.

If you're making use of IDE products, the definition of the board IDE port as the only main port. check the IDE system grasp / slave / distinctive setting. Eliminate the hard drive in addition to all IDE gadgets outside. Should you can not identify how the implementation of these do not search for, refer for your hardware documentation .

In case the computer is formatted working with the NTFS file method, you could restart the computer, after which run around the system partition Chkdsk / f / r command. In case the method cannot commence due to an error, then make use of the command console and run Chkdsk / r command.

run Chkdsk / f command to establish whether or not the file program damage. If Windows can not run Chkdsk command to maneuver to an additional drive on the personal computer running Windows, then this laptop or computer Chkdsk about the drive to run the command.

8. Quit error quantity: 0x0000007F

Caption: UNEXPECTED-KERNEL-MODE-TRAP

the usual factors: is usually brought on on account of hardware or software problems, but generally brought on by hardware failure.

Remedy: check the Microsoft Hardware Compatibility Record to make sure that all hardware and drivers are compatible with Windows. In the event the computer motherboard the challenge arises not appropriate.

Eliminate run by the recently set up hardware.

run by laptop or computer manufacturers to offer diagnostic software program for all techniques, particularly the memory verify.

Disable BIOS memory selections for example cache or possibly a shadow.

9. Quit error number: 0x00000050

Caption AGE-FAULT-IN-NONPAGED-AREA

the usual factors: memory mistakes (data not use paging file-swapping to disk).

Solution: Eliminate all of the recently put in hardware.

Run by the computer producers to offer all of the technique diagnostics software. especially the memory check.

check is correctly set up any new hardware or software, if this can be a new installation, contact the hardware or software manufacturer linkages, accessibility may well be needed for almost any Windows updates or driver.

disable or uninstall all anti-virus system.

Disable BIOS memory possibilities which include cache or a shadow.
10. Quit error number: 0x00000077

Caption: KERNEL-STEL-STACK-INPAGE-ERROR

the typical reasons: no paging file from the kernel information pages to be study into memory.

Remedy: Use the newest edition of anti-virus software, check your laptop or computer for viruses. If you ever obtain a virus, carry out the essential actions to remove him through the personal computer supernatant . Make sure you refer towards the manufacturer's diagnostic software program for all systems, in particular the memory verify.

Disable BIOS memory options including cache, shadow.

11. Stop error quantity: 0x00000079
Caption: MISMATCHED-HAL

the typical factors: the hardware abstraction layer with all the kernel or device sort mismatch (typically occurs in single-processor and multi-processor configuration files are mixed inside the exact same system the situation).

Answer: To resolve this error, make use of the command console to replace the technique files around the laptop or computer error.

single-processor program kernel file is Ntoskml. exe, and multi-processor program core file is Ntkrnlmp.exe, but these files towards the file around the installation media, respectively; in the installation of Windows2000 and, regardless of which make use of the authentic files might be renamed to Ntoskrnl. exe file. HAL file also makes use of the name from the Hal.dll soon after installation but the installation media, installation media,Windows 7 License, but you can find many probable HAL files.

twelve. Stop error number: 0x0000007A
Caption: KERNEL-DATA-INPAGE-ERROR

the usual reasons: no kernel data in the paging file will study the necessary page into memory. (usually because of the paging file The failure, virus, disk controller error, or brought on by the failure with the RAM).

Remedy: Make use of the latest version of antivirus software to examine whether or not there's a personal computer virus. In the event you discover a virus. the implementation from the needed steps to remove him from your supernatant pc, see the software program documentation to understand the right way to drop unwell degree of implementation of these steps.

Should the pc is formatted using the NTFS file program. can restart the laptop or computer, and then partition the program run Chkdsk / f / r command. Should the error can't commence the command, then make use of the command console, and run Chkdsk / r command.

run by personal computer producers to supply all the systems in a facet software, especially the memory verify.

13. Stop error quantity: 0xC000021A

Caption: STATUS-SYSTEM-PROCESS-TERMINATED

the usual factors: the person mode subsystem, including Winlogon or the Customer Server Runtime Subsystem (CSRSS) may be broken, it can no lengthier guarantee security.

Solution: Eliminate any freshly put in hardware.
Should you can not login, then restart your laptop or computer. When the list of readily available operating method, press F8. Windows2000 Innovative Possibilities menu about the display screen, pick out:
run the Recovery units, and enable the system to repair any detected problems.

14. Stop error number: 0xC0000221

Caption: STATUS-IMAGE-CHECKISU7M-MISMATCH
the normal reasons: the driver or method DLL happens to be corrupted.

Remedy: run the fault recovery console, and allow the system to restore any detected problems.
If you ever add RAM to your computer right away right after the error occurs, then the paging file may well be damaged, or through the failure or the new RAM isn't suitable. Pagefile.sys and return the method to eliminate the initial RAM configuration.
run through the pc manufacturers to provide all of the method diagnostics software program, in particular the memory verify.