Detailed livelihood mode Canon iP2000

1,GHD Red Butterfly 2011, Maximum print format: A4 2, Maximum resolution: 4800 * 1200dpi
3, accustomed ink cartridges: QY6-0054-000 (Black BCI-24BK320 nozzles, color BCI-24Y/M/C has 768 nozzles, A total of 1088 nozzles)
4, printing speed: 20 sheets / minute (black), 14 canvases / min (color)
5,GHD MK4 Kiss Straighteners, the operating system: Windows98/ME/2000/XP, Mac OS 9.X or above (USB)
6, Interface: USB2.0 FULL SPEED, digital camera direct printing interface to
7, direction path into the periodical fared (front + automatic fared for Paper)
8, boundless from the typography support,GHD Green Straighteners, (A4,GHD MK4 Pure Straighteners, letter, credit card size,GHD IV Straighteners, 5 2 orange lights flash orange jam under the lights flash 3

not fraught cartridge under the orange light flash 4
print pate not installed or installed incorrectly under the orange lights flash 5
consume ink full or near to full fault under the orange lights flash 8 Press the RESUME button
digital camera or movie camera straight printing is not supported below the orange lights flash 9, unplug the connection, press the RESUME button, and then reconnect it.
(users can not rule out failure)
motorcar the erroneous orange light / green light flash 2
LF (car encoder) error orange light / green light flash 3
cleaning unit error orange light / green light flashes 4 Next
ASF (cam) sensor misdeed orange light / green light flashes 5
under lofty temperature inside the printer orange light / green light flashes 6
waste ink full error under the orange light / green light flashing 7 under the print head
the customary high temperature is not the wrong orange light / green light flashes 8 Next
EEPROM error orange light / green light flash 9 Next
PF situ wrong orange light / green light flashing 13, the cam sensor fault
PF orange light / green light Flash 14 motor pedal under fault
orange light / green light flash of 17 under the
10, maintenance mode:
A, the first urgent RESUME button, then press the POWER key apt power.
B, press the POWER button does not let go at the same time, release the RESUME button, then double-click the RESUME button.
C, meantime health and loosen the RESUME POWER button,GHD Leopard Grain, then enter the state of repair.
D, until the power light turns green, press the RESUME button to select the digit of power setting function
Notes
0 green light function by this time the printer is not turned off while the print head, the car will be back in location and bolt seq.
1 yellow maintenance test print
2 Green EEPROM message publish
3 yellow EEPROM initialize the machine in Japan, overseas bargains EEPROM initialization
4 entire green waste ink waste ink the Qing Qing destination setting data
5 Select the yellow reception of Japan under the RESUME opener 1, 2 under the Japan Overseas
6 green print head deep cleaning
7TO9 not use
10 yellow green behind, re- Select
E, elected and press the power button to confirm