The housing considerations and maintenance instructions
hot 7torre 2008-11-10 13:57
first use
diving shells have been complete in the factory sealed water pressure test, but suggested that the first waterproof shell with your purchase, do not mount the camera or video camera waterproof shell. Waterproof housing for the completion of factory tests, in transit, air pressure changes in the packaging process, and are likely to cause subtle damage, so use this simple test to ensure that your security camera or video camera mounted on a worry-free Waterproof shell. While in the test, you can feel the hand posture and position of waterproof shell and used to your neutral buoyancy.
follow the steps below to prepare, and execute to complete a dive, and then confirm the waterproof outer shell and opened the back cover is completely dry, check for water leakage. If the water seepage is very easy to shell out to see. At the same time check the water with your fingers inside surface is wet shell, landscape around the window,
ecco casual, Port, and 0-ring groove around whether there is water all around feeling of attachment or damp air, if you feel there is water leakage in shipment inspection, immediately sent original service station testing.
dive preparation
When you bring waterproof shell Before diving in, be sure to note the following points and checking.
• Follow the manufacturer accompanying notes who properly install your camera or video camera with waterproof shell.
• installation, confirm whether the firm, whether in the diving shooting loose.
• in accordance with the \
• Turn the lever all the function keys, must be smooth without any obstacles rotation.
• After checking the back cover and cover the back cover the gap between the front cover should be very correct a straight line, and then carefully put waterproof shell sides of the ring buckle to the correct location.
• do a final check to see if any abnormalities, such as o-ring is a result of the back cover or folder to the impact, resulting not aware of falling damage.
diving course
before and you dive into the water, be sure to keep in mind the contents of the
• Do not hand holding a waterproof shell diving, even if your waterproof shell is very strong and waterproof, the water produced by diving with the moment of impact and pressure are likely to make o-ring leakage.
• I believe everyone knows that a seepage of water will not spit bubble shell is to warn you already leaking, and water poured into the water due to water pressure and the shell, and the air is also waterproof shell can not be excluded, so you must develop good habits, immediately after entering the water through multiple angles of your case whether there is water leakage in the water, there is a very good way to check is to be shot down by the Port waterproof shell can be observed. When found in water infiltration, immediately leave the water.
• Protection of water to avoid a stone shell, coral or other hard impact of solid production. Although your waterproof shell design can withstand a certain amount of impact, but may result in improper operation of water seepage.
• develop the habit of always checking waterproof shell. Waterproof shell if it were in the water, impact or similar situation, do not forget to check whether the seepage water shell. Strongly recommended that the situation in the face when, after leaving the water to be very careful to check your equipment.
dive
you may know, when the sea water in contact with the metal is highly corrosive, it can make metal rust very quickly, so that the rapid oxidation of aluminum. Even if your surface is waterproof shell plating and ammonia potassium acetate coating machine to resist the erosion of the sea, but even the best protection can not withstand prolonged exposure to water,
ecco boston, especially deep scratch or dent more easily cross the aluminum decomposition of surface erosion by the salt. This is very bad!
Again, as long as some simple steps to avoid water seepage problems.
• When you have finished diving out of the water immediately after your waterproof shell will complete immersion in water. If you can not immediately soaked in water,
ecco sale, then dive as soon as possible after the immersion. As much as possible in your waterproof shell 清水中浸泡 long as possible, at least before the immersion in the cleaning and storage of several hours, this action can wash all during the dive there is little gap of salt.
• waterproof shell when you are immersed into the bucket, the need to be careful not to waterproof shell with other people or equipment colliding with each other, especially
do is to control the lever and Port, Port will be built if on re-immersion.
• If you do not plan to open two waterproof shell back cover diving, dive in before the next time you do not need to be soaked in water, waterproof shell out.
• If you take two diving open water between the cells in the shell to replace the back cover batteries,
ecco boot, film or videotape ..., open the back cover to be thoroughly dry before the waterproof shell, you can use high-pressure cylinders air will drop to blow away. When you open the back cover to be careful not to let water drip drip shell. If you want to replace the lens when the Port is the same action.
• When you are ready to close the waterproof shell when the water before you once again according to the \
waterproof shell storage
When you end the dive and ready to store your waterproof shell,
ecco usa, then there need to pay attention to.
• After you remove the camera or camera, waterproof shell completely soaked again on the water for at least several hours. In order to break down residue in the minor groove joints of salt, even if completely immersed in water for several days, but that is OK for non-hazardous.
• waterproof shell with a towel to dry completely, the Port,
ecco shoes outlet, handle, and can be disassembled to remove the O-ring, and then high pressure air will be left in the trench, Port and Port interface with the waterproof shell drops of water blowing, and blowing it could see the water mark. The same all the parts and other accessories you use water, in the same manner.
• Do not travel on the waterproof shell waterproof case, because the water droplets may not be discharged outside the box and the internal manipulation can not be left in the foam dry. Waterproof shell recommend that you placed on the shelf, it is best to air dry and cool place. Travel with your child open the waterproof cover for air circulation, do not store your waterproof shell in the humid environment.
• final confirmation, and then stored underwater housing waterproof shell is required to keep open, so that outside air can flow naturally. Battery case, the screen also used the same method to save the shell.
fish in the water 2009-04-28 18:42
I'll add this: Do not fly when the water in the shell cover! Or play an open! Otherwise, wait for the next aircraft waterproof shell to open so hard! !
2009-04-28 22:41 bevel shark remember to dive in aircraft shells open, low pressure will cause damage.
christian louboutin website 男子捧玫瑰冒雨求爱 围
Linear Mode
