Photoshop skills, Photoshop skills 167 prestigious

transferred to leftover, behind slowly studying
based learning PS: Photoshop skills 167 -
prestigious Photoshop capabilities Daquan, whether you are the level of the initial stage, versed with the story and master, swiftly advanced to intermediate level. Oh definitely not advertising. -
prevalent technique classic Photoshop skills Daquan, if you are the level of the initial stage, familiar with the article and main, immediately advanced to intermediate level. Oh definitely not advertising. -
-
1. rapidly open the file -
Double-click the Photoshop background blank (the default is gray display area) to open the selected file browser window. -
2. free to change the canvas color -
Select the Paint Bucket tool and Shift-click the edge of the canvas, you can set the canvas background color for the currently selected foreground color. If you want to revert to the default color, set the foreground color to 25% gray (R192, G192, B192) Shift-Click again to the edge of the canvas. -
3. selection tool shortcut keys -
by urgent the shortcut keys to quickly select a tool in the toolbox, each tool's letter shortcuts are as usual: -
box-M mobile-V-L lasso sorcery wand-W-
gun-J-B brush pencil-N rubber stamp-S-
history eraser brush-Y-E-R fuzzy Dodge-O-
pen-P text-T-U metric gradient-G-
straw bucket-K-H-I starting point scaling-Z-
default foreground and background colors-D switch foreground and background color-X-
amend mode display mode switch-Q-F-
In counting, if we hold down the Alt key and then click the Display icon in the tool, or hold down the Shift key and repeatedly press the letter shortcut keys you can cycle via hidden tools. -
4. exact cursor -
press the Caps Lock key to make the brush and the magnetic tool cursor appears as precise reticle, and then again to return to the status quo. -
5. show / hide the control panel -
press the Tab key to toggle the exhibit or hide all panels (including kit), if you press Shift + Tab is the toolbox is not affected, only the control panel display or hide the other. -
6. Rapid Restore Defaults -
Some friends are not agreeable by Photoshop to adjust the tangles and turns really satisfied with the results, and found that the best is still the original default, which under the most embarrassing, the original should not apologize it! How to reinstate to the default amount it? Try to gently reception the tool icon on the alternatives bar, then from the context menu, select -
7. emancipation to control the size -
zoom tool shortcuts for the and to display full-screen view of the circumstance can be! If you want to use the zoom tool automatically adjust according to picture the size of the window, you can zoom tool in the properties partition, click -
8. using non-Hand Tool (hand tool), hold down the space key can be converted into hand tools, you can move the apparent range of the image window. In the hand tool can double-click on the image to best eligible the size of the window displays, double-click on the zoom tool can display images in a 1:1 percentage. -
9. in the use Erase Tool (Eraser tool), hold down the Alt key to switch to the eraser function to specify the steps to restore the state record. -
10. using Smudge Tool (finger tool), hold down the Alt key can be simply applied to convert coated with the foreground color. -
11. To move use the Type Mask Tool (Type Mask tool) to play the fashion selection, it can be switched into Quick Mask mode (using the shortcut keys Q alternate), then the move is completed at a time the switch again back to the criterion prototype can be. -
12. Hold down the Alt key, use the Rubber Stamp Tool (rubber stamp tool) to open the image at any window click of the mouse within the window set in the sampling location, but will not change the character of the window. -
13. using the Move Tool (move tool), the arrow keys on the keyboard can directly move the layer distance of 1 pixel on the image, if you first hold down the Shift key and press the arrow keys to places each 10 pixel distance from the moving image. Press the Alt key while dragging the selection will move the selection of the copy. -
14. using magnetic lasso tool or the magnetic pen tool, click -
15. measurement tool in the dimension of distance is very handy (primarily in the diagonal), you can also use it to meter angles (like a protractor). Visual prelude in the information panel, select the weigh tool click and drag a straight line, hold down the Alt key node from the first line again and again out on the second line, so the angle among two lines and line width are displayed on the information panel. Measuring tool drag to move the measuring line (you can also just move the measuring lines of a single knot), the measurement lines to the canvas on the outside, it can be deleted. -
16. using drawing tools such as (such as the brush, the pen, etc.), hold down the Shift key and click the mouse, you can click on two points a straight line. -
17. Hold down the Alt key to select the color with the Eyedropper tool to define the present background color. By combining the color sampler tool (Shift + I) and the information panel to monitor the current picture of the color change. Changes before and after the color values ​​displayed in the information panel afterward to the sampling point number. Through the message panel on the pop-up menu to define the color pattern of sampling points. To add a new sampling point on the canvIt’s about time just a color sampler tool to whatever place and then click, hold down the Alt key and click to remove the sampling point. But a map can be placed up to 4 colors on the sampling point. When a dialog carton in Photoshop (example: Levels command, the curve command, etc.) pops up to add a new sampling point must hold down the Shift key and then click, hold down Alt + Shift click on a sampling point can be deducted. -
18. Cutting tool we all must be used, in which case you may have encountered; you adjust the cutting grip, and the harvest box and relatively near to the border of the image when the cut automatically accompanied to the frame the edge of the image, so that you can not crop the image accurate. But at a time the adjustment of cutting the time frame to take over -
-
-
replication techniques -
19. Hold down Ctrl + Alt key to drag the mouse to copy the contents of the current layer or selection. -
20. If you have recently copied a picture exists in the clipboard, Photoshop in the new file (Ctrl + N) when the picture will be the size of the clipboard as a new map of the default size. Bypass this function and use the last set, in the open while holding down the Alt key (Ctrl + Alt + N). -
21. If you create a new go, need to open the picture with a piece of the same size, resolution, file formats. Select
22. using the Free Transform tool (Ctrl + T), hold down the Alt key (Ctrl + Alt + T) to first copy the original layer (in the current selection) after the copy layer to transform; Ctrl + Shift + T to repeat the last transformation, Ctrl + Alt + Shift + T to copy the original image and then perform transformations. -
23. use the (hack) glue the new layer command will be placed in their original place, but through the copy (slit) and then paste it will paste the picture (or selection) of the center. -
24. do not want to directly copy the image name dialog box appears, you can hold down the Alt key first, then run the -
25. Photoshop clipboard is serviceable, but you also want to use the Windows system clipboard instantly, directly from the screen image on the interception. Well, reception Ctrl + K, in the pop-up plate will be -
26. in Photoshop to achieve a regular copy -
when act the layout of decisive elements that we will always have regularly placed to seek a form of charm, in Photoshop shortcut through a medley of four can easily reach. -
(1) circle you ambition to copy the selected object; -
(2) Press Ctrl + J to produce a drifting Layer; -
(3) by circulation and move to the appropriate location to confirm; -
(4) can immediately hold down the Ctrl + Alt + Shift after consecutive press (Just hold down the Ctrl + Shift is just a regular mobile) -
27. When we prefer to copy the document thing, use the Edit menu Copy bid. You may not feel a replication distress, but multiple copies, click once on a very inconvenient. Then you tin first select the thing with the Selection tool, then click the Move tool, then clutch down the When the cursor changes to a black and white overlap with the 2 brained signal,Nike Shox OZ, drag the mouse to the lusted situation. To copy numerous times, equitable reiterate the relaxation mouse on the line. -
28. you can use the Marquee tool or the lasso tool, drag the selection from one document to another on. -
29. for the current history state or snapshot of a copy document can be: -
(1) Click on
(2) From the History panel menu, select a new document; -
(3) Drag the current state (or snapshot) to
(4) Right-click on the desired state (or snapshot) from the pop-up menu, select a new document the history of the state in the history of the current picture of a picture window onto another state may change the purpose of image content. Alt-click on any of the history of the state (in addition to the present, the most recent state) can copy it. And after copying the state becomes the current (most recent) state. Alt-drag action steps you can copy it to another action. -
selection technique -
30. the selected space or layer drag from an document to different, hold down the Shift opener to hub on the intention of the document. If the source document and the purpose of the document's size (size) the same, the dragged ingredient ambition be placed in the same location where the source document (preferably than on the center of the canvas). If the purpose of the document contains the constituency, the dragged element ambition be placed in the center of the constituency. -
31. in the action palette, by clicking the triangle button, select from the menu to load the action into PhotoshopGoodiesActions catalogue, under which a button, descriptions, orders, image effects, txt effects, textures, 6 frame action set contains a lot of useful stuff yo! In addition, the catalogue also has a ACTIONS.PDF file that can be accustom to open Adobe Acrobat software, which careful the use of these actions and produce results. -
32. click on the toolbar of the brush type tool, the properties shown in the following section, click the small triangle brush right of the tag, the pop-up menu, then click the small arrow to choose To Photoshop's Brushes direcotry in the directory selected *. abr. There are so many lovely old things. -
33. draw a nice signal, would like to reuse in the works? Easy to knob, use the Lasso tool selected it in the Brushes pop-up menu select
34. If you want to choose between two options for the local part of the existing next to whichever selected area, hold down the Shift and Alt while dragging, draw the second selection area (across appears next to the mouse a multiplication sign, said the coincidence of the area will be retained). -
35. in the selected area to remove a square or round, the first increase in any of a selected area, and in the selection area, press the Alt key to drag a rectangular or elliptical mask tool. Then release the Alt key, hold down the Shift key, drag to your satisfaction. Then release the mouse button before releasing the Shift key. -
36. from the center outward to delete a selected area, a choice in any area, press the Alt key and drag a rectangle or elliptical mask tool, and then release the Alt key and then hold down the Alt key again, and eventually release mouse button and then release the Alt key. -
37. in Quick Mask mode, switch to quickly select a mask regional or regional options, first hold down the Alt key will move the cursor to Quick Mask mode, click the icon on it. -
38. use the marquee tool, hold down the Shift key to draw a square and the absolute circle of constituencies; hold down the Alt key constituencies from the starting point for the center profiled. -
39. use the -
40. using the lasso tool to outline the time to press the Alt key constituencies in the lasso tool and the Polygonal Lasso tool to switch between. Outline the constituency can be moved while holding down the space bar is outlined in the constituency. -

1. Duplicate the layer mixture mode to Screen,
2. Coated 2 eyes mask reverse clashes
3. stamp (alt + ctrl + shift + E)
4 . channel fusion, select the color, red +54, Green +54, Blue +32
6. merged mode - are stacked
7. adjustment of the seal layer, Image - Adjustments - Shadow / Highlight - Shadow: 50,50,144 high light: 0,50,30 middle tone: 20,0 0.01,0.01
8. once again stamped
9. wipe the right impudence with the seal of the sun
10. with the Dodge tool - the scope of high light intensity of 50%, struck a reflective eye, just rub the eye black,
11. once anew stamped Filter - Other - High contrast, parameters 80
12 . change the layer mode to high-contrast soft, enhance contrast,
13. use your preference means of sharpening
14. because a long period fewer saturated hue of ruddy, or other fine-tuning to attempt


1, select the material map.
2, create a new canvas, filled with black background and character material onto the canvas, use the eraser tool to erase parts of the face outside.
3, establish a new transparent canvas (20 x 20px), the foreground color to pearly, use a 1px pencil tool on the canvas and under the left side of stroke.
4, Edit>> Transform>> distortion, press the map to adjust the grid-layer nodes.
5, the layer opacity to 20%. Double-click the layer to open layer style window grid, select the external flicker, blending mode to
6, create a new layer, use Pen tool to select a number of boxes along the grid, and fill it with black.
7, hold down the Ctrl key and click on the layer above the black box to obtain selection, choose the portrait layer, cut and paste (paste layer named after the After their narrow point moves to the following location.
8, select the debris layer, hold down the Alt key while clicking the right keyboard arrow key (point 9), to be alike to the three-dimensional effect. Layers panel appear at this time to penetrate debris layer 10 will in addition to other debris outside of the top layer of the merger and the merged layer Double-side layer, open the Layer Style window select Gradient Overlay, the Opacity to 80%, angle 180, use # 000000 to # D58761 gradient, other attributes take default values.
9, use the brush tool to add some texture to the side effects.
10, repeat steps 6 - Step 9, win the following results.
11, will merge all the layers of the black box, double-click to open the Layer Style window, select Bevel and Emboss, the style of . High-light mode for the
shadow mode
12, below the debris floor to create a new membrane, use brush to increase cigarette effects cloud. Select the debris layer, use soft black brush painted canvas on the right corner to get the following discolor effect.
13, the top layer in the figure to create a new layer, again using the pen tool a number of randomly selected box, and fill it with black. The layer blending mode set to
14, the same operation and tread 13, but replaced along a white fill color.
15, select the character layer, Filter>> Blur>> Surface Blur, radius 5px, threshold 15. Create adjustment layer at the outset layers, layer>> Create Adjustment Layer>> Levels, attribute to 10,1.25,244.
16, in order to get cool feel, you can add a barcode tattoo on his arm.

1. new gray overcoat, with a bend to adjust sunlight, 152,124
2. cutout eyes and mouth, to be accentuated,
3. reduce the overall saturation, saturation -56
4 colors with color overlay to the whole proclivity,
5. superposition of two layers of hidden hue and color, open the Channels palette, copy the R channel,
6. a new layer paste and adjust the transparency with the color filter pattern


1. Duplicate Layer, New Adjustment Layer-channel mix, gray channel, red +64%, Green 2%, 10% blue, monochrome
2. New solid mixed layer, select 575 046 colors, blend mode to Color,
3. New Curves Adjustment Layer, ① - input 68, output 32, ② - input 114, output 68, ③ - input 208, output 197,
4. create one solid layer, select 443B25 color, blend mode to color, press Alt-click mask,
5.Ctrl + D to restore the default background color, Ctrl + Delete to fill the black mask the background color,
6 to change the picture in high light and dark parts of the color transition to enrich the color, use a brush inserted in the mask
need some color, 300 pixels, opacity 10%, flow 100%
7 fonts preparation and devise
8. In order to make figures and screen colors have reverberated to the character's point of lip gloss on the lip,Nike Shox R5, create a new layer, select the Linear Dodge blending modes, add 90753D color, choose the brush on lip gloss, abrasive point pen, pixel 39,
9. augment the lip gloss reflective parts of the draw, scrutinize, constant adjustment, the overall picture look good after lip gloss, this time the screen has a echoed, color become rich, not overwhelming, just send out a product,
10. If the product directly with the body in the model, and people tune in to greed after, or with the mask color to the product directly to the plug out of the product can


1. open the file, copy a layer copy of the
2. Select the duplicate layer of free transform to change the shortcut key ctrl + t to make the characters more slim face shape
3. by Merge Layers (ctrl + e), the use of cutting tools to upload images from a new composition, cut off the extra part,
4. Image - Adjustments - Color: Red - 70, -20, -20, -50. yellow - 40, -20, -30, -80,Nike Shox Kvinner, white -0,0,0, -50. halftones -0, -5, -5, -5
5. according to curve (ctrl + m) adjust overall color, RGB full-channel - output 214, input 174 and blue channel - output 131, input 124,
6. Image - Adjustments - Color Balance (ctrl + b), the shadow -10,0, +15. High light - 10,0, +2.
7. Around the mouth with a seal tool to cover the skin evenly,
8. With a pen to circle dark bags under the eyes and face, the emergence 60, curves to brighten the constituency Dodge reduce bags under the eyes and facial muscles are not loosened expression,
9. proceeded emergence constituency 60, curve brighter, so that the face full, the output 146, input 113.
10. circle to highlight some of out, feathering 60
11. curve brighter, so that the face full, the output 138, input 118.
12. eyebrows, the eyebrows and top of the surround with the rind with a lasso tool, the emergence 5, duplicate a layer, the Duplicate the layer and push down in order to achieve eyebrow shaping effect, ticket eyebrows, this have to be quite thoughtful
13. began to adjust your eyes, choose the part of the eye ring out, copy the layer
14. pen circle to do eye shadow district, copy a layer, the curve of pressure dark color to adjust,
15. then uniform color eye shadow,Nike Shox R2, color balance (middle tone): +50,0,0. (Shadow): +20,0,0,
16. The details of color adjustment, the upper eyelid 1 / 3 part, Hue Saturation: 0, -40,0
17. Circle the details of the upper eyelid eyelash root Department, under the eye before eyelid 1 / 3, press the DELETE key to cancel the selection, the exposed high-light situation,
18. remove the surplus part of eye shadow, feather 40
19. circle detail on the inside corner to the eyelid 1 / 2, press the DELETE key to delete the selection, so that exposed Highlight
20. circle the eyes out, copy the layer, emergence 1, part of desaturation whites, mottled back, Hue Saturation: 0 -50,0
21. whites details of the adjustment, curves adjustment to increase the light,
22. eyes shine tone forgery curve after layer, brush pen on the back half of the left eye, showing some shadows
23. remove the pupil part
24. with a curve to adjust eye color, so that the same
25. plus eyes high light
26. circle the lips, emergence 2, high-gloss lips curve adjustments to adjust the lips color
27. adjust the nose Liang Gaoguang, adjust shadow highlight
28. with optional color palette as a whole, the middle color -0,0, -2,2.
29. Yanping Heng fine-tuning the use of color, (high light): 0,2, -2.
30. liquefaction along the hair pull, combined with lens flare, light 182,35 mm focus,
31. plus, where appropriate, final flash brush complete


1. establish Hue Saturation adjustment layer, Saturation -49,
2. the establishment of an optional color layer, red: -49,0, +7, -41. Yellow: 0,0,0 , -23
3. the establishment of the Hue / Saturation layer, brightness -49
4. Colors. Yellow: 0,0,0, -26, white: 0,0, +46,0. Intermediate color: 0,0, -6,0.
5. Colors. Red: 0,0,0, -48. Black: 0,0, -47, +5. Transparency down to 37%
6. Stamped, ruckus abatement, sharpening, painting and simple to use tool to repair the knee near spot,
7. and secluded corners, production a heart-shaped selection, emergence, with curves to brighten.


1. open the native image, copy the layer, fill pure black, overlay mode.
2. New Hue Saturation layer: saturation -85.
3. New Brightness and Contrast layer: contrast +10,
4. New optional color, red: 0, +30,0 , +100. Yellow: 0, -15, -100,0. Intermediate color: 0,0,0, +5.
5. Stamped Filter - Render - Lighting Effects: points of light, intensity 21, Focus 24, luster 0, the material 69, 0 exposure, the environment 8,
6. stamp, plus text-decoration


1. Duplicate the layer, Filter - Blur - Radial Blur: number 71, blur method - zoom, quality - good,
2. to establish a template, struck a car, then smear the dynamic cycle clashes ,
3. Levels - optional colors. Plus material, performance the whole atmosphere, with minor changes Dodge made, the main diameter of 5, the hardness of the minimum


1. to tweak the color hurl, adjusting a rough tone, establish Levels adjustment layer Levels full channel: 0,1.35,255. Levels Red Channel: 0,0.85,255. Levels Green Channel: 0,1,10,255 Levels: 0,0.95,255
2. The establishment of the Hue / Saturation adjustment layer to dwindle the original image's saturation, Full Figure saturation -30
3. a Photo Filter adjustment layer, the first step in the blue has bring an end to ..., this step is to deep yellow with a concentration of 25%, mode mode, the original place where the dark darker, choose the Channels palette, hold down the ctrl-point red channel, get the selection back to the photo mask in the filter filled with black.
4. the establishment of one optional color adjustment layer, red: 100, -33,100, -40. Yellow: 0,0, -40,0. White: +15,0, +20, +20
5. To brighten some of the windows, set up the Hue / Saturation adjustment layer to in other parts of the window wipe. Hue 260, Saturation 25, Lightness +75
6. To create a color balance adjustment layer, the characters and the surrounding environment to distinguish, set in the mask after using large soft black brush to figure as the center angle wipe it. Levels +20, +20, +40, select midtones


1. create a new layer, fill light yellow, overlay mode, the value 247,240,197
2. copy just the yellow layer, Linear Burn mode, the mask given rise to a yellow motorcar, avoid automobile color through yellow,
3. adjust brightness, contrast,Nike Shox, high light exposure part of the normal color and subject, brightness -20, contrast +64, New Saturation adjustment layer, saturation -31. to determine the ultimate brightness of the sunshine to high light at the color and detail prevail in the dark can be ignored,
4. Duplicate the background layer the shadow highlight adjustment to the most shadow detail as a benchmark in place, the shadow: the number 100, color width 33, radius 102, tall light: the digit of 0, the tone width 50, radius 30, adjustments: color amendment, +20, 0 midtone contrast, the construction of black 0.01%, the construction of White 0.01%
5. Duplicate the background layer to adjust brightness of the sky, with the exposed layer to make up the sky over deficiencies,
6.-tuning the details, to wipe the sky cables, repair Clone brush will do,
7. Flatten Image, fine-tuning the details, sharpen


1. Open to copy the picture layer, Ctrl + Alt + ~, to be selection, emergence 3-5. curve brightens, about 18,0
2. Adjust levels: 25,1,20,245. Mongolia version of the main characters and details of some clashes
3. stamped, resurfacing of the characters to brighten the edge of the modified sharpening
4. on the back layer for color balance, midtones: -12, -10, -13 High light: +8,0, -19.
5. back layer into LAB mode
6. Create a new layer, Shift + Ctrl + N, soft mode, transparency 30-40%
7. in the new layer applied on the image, layer: mingle layers, soft mode, transparency 100%,
8. adjustment layer, the lightness channel curve adjustment, 5,0
9 on the LAB color image hue saturation adjustment, full-figure: 0, +10,0. Yellow: 0, +35,0 Green: 0, +15,0. Red: 0, -20, 0 Blue: +10, +30,0.
10. into Levels: 20,1.20,245. adjustment of the lightness channel, a gradient in the mask with a circular out at the chief characters, and then erase the brush out the details
11. stamped return RGB color, color options accessible for the image, the red channel: 0,0,0, -30 on the mask clashes petals
12. stamp,Nike Shox R3, New empty layer with white brush to increase watering effect, pen pressure. 100% hardness, spacing +54%


1. get hold of handsome eyes point to increase the visual and magnetic copy eye out, change the eye color filter layer model, this effect is relatively simple to do foreigners, easterns or preferably with a US-pupil or another
2. brighten the face, prominent face, with the lasso tool to pitfall the face, brightens after emergence, not too bright,
3. with the lasso tool to pull the hair, pulled face it does not matter, can then use the eraser clean, brighten after emergence
4. comprehending the whole, it seems a unified point, the hair part of the eraser can erase a little bit,
5. cover to get a new layer (Ctral + Alt + Shift + E), with a stamp on the face of the mole-volt tools, puny diminish in color counterweight point color, and increase the lustful point, it seems the white point,
6. Create a new transparent layer, the layer mode to soft, with dingy eye shadow in the upper and lower lash add the color from the inside of the eye issue, from deep to superficial, layered with a soft brush highest
7. Create a new transparent layer, soft mode, draw a circle with a purple eye shadow as background, if the results are not fearful to adjust the color can often use opaque, know thatuntil evenly
8. Adjust the high light areas of skin to add a new transparent layer, overlay mode, brush painted with the color of the nose, the most apt to find the root color photographs and increase high-light, the benefits that can cultivate the contrast to increase visual,
9. make the overall adjustment to increase the The new transparent layer, soft light mode to increase the area of ​​high light color, the color change in the forehead with dark red hair and add there between, additional shadow, face red saturation is not too high, nor too low, emotion applied to the face looks like a real,
10. a new transparent layer, the soft mode, the high level of light in the nose, add some high-gloss colors, make the neb see more deeply with the outlines, higher pick, can wipe his face dirty place out, or have dark areas
11. a new transparent layer, overlay mode, to the lip color, painted purple, transparency of 70%
12. a new transparent layer, positive overlay mode, 40% transparency in the nose, forehead, face where the increase in black and red, add shadows with layering,
13. a new transparent layer, overlay mode, the eye shadow to be of two layers, a layer is a little light outside, inside to deep purple, the best Gaussian disturbed about until evenly
14. new transparent layer, soft light mode to increase the black-purple, black make this differentiation, it seems more glamorous,
15. a new transparent layer, overlay mode, including the eye to the nasal has to face office, people, drawing on the light between the two lips, dark red, add a sense of contour levels, adjust the transparency of the painting is completed, may be some deep
16. side of the forehead and alley face, deepen the color, overlay mode, the color is the red line,
17. plus there below the shadow of the lips, or mouth looks ########
18. covered with the same color his face dirty place, with a straw draw next to the same color, may cover part of the hair, for a painting can be.
19. a new transparent layer, the soft mode, the next home on the green eye shadow,
20. mouth with polluted face, where the same color with a pipette, fill the new layer to the dirty area,
21 . Create a new layer Multiply mode, transparency 20%, painted black and red make up,
22. facial hair is dark brown, black hair, which hair color is lighter gray, the painting is good the hair part,
23. Create a new layer, fill color to cover the forehead close to the skin, cotton looks so rough
24. face complementary color, look more red, more compliment, more to preoccupy distant
25 new transparent layer, the Multiply mode, the transparency of 50%, brown on the forehead, pressed dark skin color, to enhance the contrast
26. a new transparent layer, overlay mode, 50% transparency in painting cheeks orange, foreigners face more exaggerated component, the red point does not matter,
27. the adjustment of the overall color, sharpening what


1. open the original file, according to their own sense of color adjustment through the adjustment of the film, and dermabrasion, microdermabrasion value not too much, (Neat image plugin)
2. a new layer, color FEE7D6, ( According to the film character's skin color set), layer mode to Overlay and 25%, 20% with a brush the skin on the face and cervix light coating,
3. features of the detailed work, cutting out the mouth, the emergence copy (Ctrl + J), using the smudge tool to smear on the lip, the lip skin becomes soft and slight (not also much strength)
4. Create a new layer to the lips and face color, color FDC1D6 , the layer mode to color, with a brush in the side of the lips and face painting,
5. with the Dodge tool, the range is the high light exposure of 25% to draw the lip of the high light, with the Burn tool, the range is intermediate, 20% of the exposure, contrast improved lips,
6. a new layer, color 8E1A25, brush pixel is 3, paint the inside of the inside, then draw 2 pixels appearance the lips lines (high-light Dodge disguise some part of the line was built)
7. circle the emergence of the nose, copy, use the smudge tool around the agreeable elegance of the nose, then use the Dodge tool range is a high light exposure of 20%, to strengthen the next nose high light, and then use color 422B2D, 2 pixel brush to draw the nose contour (lines light up with a better tool if to make up for the next)
8. eclosion circle replication of the eye brows with the smudge tool on the soft skin approximately the eyes, thinning eyebrows, and then use the Dodge tool range is a high light exposure of 15%, to strengthen the high light under the eyes, with better tools the navel range, to deepen the lines around the eyes,
9. with the smudge tool to smear some of the detailed eyes, look softer, with some better tools to enhance black eyes, with the Dodge tool range is a high light exposure fewest 20% of high light to enhance eyes and make the eyes look brighter,
10. color 080101, 3-pixel brush, draw eyelashes part (the line Dodge tools to deepen the color depth can be used to make up) eyelash line can also be used paths and some other methods tick,
11. with the spot tool to apply the prettier eyebrow, brow a little rough smudges slightly darker color, apply diluted down forward the back, then two pixels with a brush in front to draw eyebrows eyebrows lines, so eyebrows more structured,
12. Smudge tool to choose the hair brush, (according to hair texture to set brush shape), applied the process to be applied along the hair texture, not too much force, to be applied uniform,
13. cilia brush coated with a natural part to assembly, (cilia must be applied carefully)
14. draw the hair texture, the new layer, layer mode to Overlay, choose a pencil to 1 pixel, (picture size to the value resolute according to figures), along the hair color is DFDFDF draw smooth texture lines
15. horsetail some choose the brush tool, brush softly with a fork along the texture of some of the painting, the color layer model above,
16. Create a new layer, the normal mode, select the brush tool, pixel 1, opacity 60%, 80% flow, the color is white, draw dynamic forehead hair,
17. raiment and necklaces with the smudge tool applied in some softer, and then choose to use the Dodge tool, the range is the high light , exposure 20%, dress and necklaces to enhance the high light
18. synthesis of the whole image sharpening, sharpening value is 8, with the Dodge tool to highlight some of the little processing, the overall color correction, the ( can be modified to add some background light, highlighting the theme)


1. open the original image, copy the layer, the image - adjustments - desaturate
2. filter - Artistic Effects - Plastic packaging, according to the original image to reduce transparency
3. adjust the black level color scale, is the picture black and white, Levels: 88,0.27,192
4.Ctrl + Alt + ~, high light extraction layer of black and white constituencies, money becomes small eyes, hidden, back to the background layer,
5 . to get in front of the high-light selection to adjust the curve, pulled the top of the curve, the effect came out
6. adjust the brightness contrast of the background layer, amplify, or about the appropriate tone color, brightness, +4, +7 contrast


1, open lotus photo, copy the background layer.
2, to adjust levels to increase color and black and white contrast. Levels: 15,1.0,200
3, reversed after the implementation of Gaussian blur, radius 1, then go to Filter - Brush Strokes - splash. Spray radius of a color, smoothness 3
4, a new layer, set the layer blending mode to color, with pink lotus brush to paint color.
5, and then add some promiscuous text, stamp, complete.


1. into the channel panel, then use the
Channel Green - Mixed Multiply, Opacity 20%
channel red - mixed dark, opacity 100%
2. Adjustments - Color Balance - High Light - Levels: -8, +13, +11
3. blue channel during the time the application image layer: Background - Mixed: Multiply, Opacity 50%,
4. with curve adjust the brightness, move the top right of the red channel a little morsel,
Blue channel all channels 6,0 4,15
5. copy a layer copy of it, again the blue channel of operation, miscellaneous Multiply, Opacity 50%
6. the final entity to do namely prominent figures, and with the eraser, given heave to some people, pay care to the fitting lower transparency.


1. Copy a new layer
2. with the stamp tool to repair acne out
3. the results of the repair records pox snapshot,
4. do a Gaussian blur, intensity, texture of skin faded prevail, radius 4.0
5. snapshots, appointed Gaussian blur []
6. by [] to make the picture back to the repair of acne acne just when completing the state, and point [Gaussian blur ] the left frame, the small icon to switch over, which is immediately in order to use the History Brush as the target point
7. the history brush, smooth it needs at the face painting, pay attention to avoid the contour and hair, eyebrows, etc., you can use the [key and the] key at any time to change brush size, to modify the minor part, if necessary carefully brush the wrong, does not stuff, at all times you in the History panel, the small icon to the left of the point acne according to [repair], and then painted, you can brush back, said at the beginning of the process is reversible
8. you can change the brush's opacity to control the intensity of your painting, the brush 20, opacity 55%
9. After the effects wear smooth, very smooth, but no skin texture, but also the next step processing
10. snapshots of grinding [smooth], each period is complete, we are the best record, you can all work back.
11. continue to do so, Ctrl + A to select all months, again a Ctrl + C, copy under the aesthetic effect. Then, click the History panel repair acne on [], so that the file back to the finish before the state
12.Ctrl + V to copy down the achieve effect just loosened into the new layer and change the transparency that can be revealing some of the lower, opacity 70%
13. Click the lower, that is, not wear off that layer, to a much sharpening, the number of 140, radius 0.7,
14. This overlay, delicate skin without losing texture texture, skin polishing steps to complete, and memorize to save the snapshot to complete [skin]
15. pulled below the layer 1 icon, copy the new layer, set to

1. Select the blue channel
2. Channel Mixer, retard the
3. dermabrasion, body beautification characters.
4. to give people the skin and clothes with parameter default; use after effect is blue, but also use the
6. to effect step 6 mixed-mode to
8 ..
9. fine-tune what the roles face color, brightness, contrast, and some of the details.
10. produced as shown in the
12. to the
13. The


1. Duplicate the layer and adjust - to color,
2. curve adjustment, increase the chiaroscuro, the input 114, output 186
3. Duplicate the layer, Filter - Brush Strokes - ink outline the stroke length of 5, 10 look-strength, light intensity of 10, falling into a soft light layer mode, adjust the opacity,
4. Filter - Gaussian Blur, Radius 2.0 pixels,
5. Filter - Brush Strokes - spray, spray radius of a color, smoothness, 3,
6. add the light brown solid layer, Figure Cen Enchanters of color, adjust opacity, not transparency, some as small as feasible,
7 points out of a solid color layer and the layer in front of the eye to hide it, the new layer with the brush in the lanterns, trees, tiles, etc. with the appropriate color layer,
8. to restore a hidden layer, change the layer mode to overlay, to see the effect to tune the details,
9. the overall effect on the shade to nice tune, until satisfactory results, no characteristic steps alter


1. a picture with the white side of the picture scenery arrange, for do the corners with a white frame spillover effects
2. hue saturation: saturation +80, adjust the impressionist effect,
3. redactor - Define Pattern.
4. to build a white fill layer, 50% opacity, to build a transparent layer
5. pattern stamp tool, brush the main diameter of 200, comes with the brush watery media brushes 45 voting, mode normal, opacity 100% , Impressionist in front of check,
6. in a transparent layer pattern stamp painting, great long-term time King strokes, whereas the small details of the multi-stroke, adjusting the opacity of the layer above to view strokes,
7. Copy Background layer to the color filter - splash, 71% opacity, layer mode to Overlay
8. Filter - Texture - textured, opacity 100%,
9. filter - distort - spread light 37%


1. in RAW to adjust the brightness, contrast, after adjustment for the laying the basis,
2. combine the sky material, easy transparency, make the sky into the layer,
3. New Adjustment Layer optional colors - middle color: +20, +6, +7, -4, perfect, a little water color uniform,
4. filled with yellow color, opacity 54%, dark blue fill color, opacity 61 %, fill deep purple, opacity 76%,
5. fine-tuning, high light and middle tone selection method and the resulting mask, high-light selection method: calculation - Source 1: Layers merge layers, gray channel, the source 2: Layers merge layers, gray channel, Multiply blend, opacity 100%.
6. midtones selection method: Source 1: Merge layers, gray channel, the source 2: Merge layers, gray channel, Multiply blend, opacity 100%.
7.RGB aisle to get the mask, with curve adjustment, high light adjustment: Black wire grid on the left in the middle of the penultimate line, blue line to the cut point, midtone adjustment: up to adjust some,
8. reflected light mask, lasso select constituency, emergence, overall brighten,
9. boat debris to reduce saturation, Saturation: -36,
10. sharpening overall


1. Duplicate the layer and adjust the brightness, contrast, Merge Down,
2. into LAB mode, select the image using an image, to count,
3. the layer mode to color, cover published layers,
4. into the RGB channel, blue channel will be filled with black, to extract the green channel selection, will fill the selection with white,
5. Hue Saturation, Red: +20, +1,0. cyan: -7, +26,0 Other data without moving the layer mode to color,
6. into the RGB outlet, select the green outlet culling, anti-choice, color balance adjustment layer, select midtones , values: -10, -6, +16. shadow: +4, +5, -2 High light: -19, -26, -40
7. back layer, into the RGB channel, select the red channel constituency, copy, paste back to RGB mode, layer mode to color, select the adjustment layer curve, the red channel: 173,193. Red channel: 58,56. Green Channel: 180,201. Green Channel: 53,58. Blue channel: 55,62.
8. The layer mode to color, copy the layer, copy the map layer, layer mode to brightness, transparency, 20%
9. Select the adjustment layer, hue saturation, blue: +5, -49, -2.
10. adjust the color balance adjustment layer, the middle tone: -6,0, +3 shadow: -7, +3, -1.
11. color balance, shadow: +4, +5 , -2. Shadow: +4, +5, -2 High light: -19, -26, -40.
12. Plus the lightning effect.


1. copy the layer into a Smart Filter, you can filter for the purpose of effect of adjustment
2. percolate - render - lighting effects, all light, negate 17, Matte -25, 100 plastic effect, exposure of less than 32, negate 28,
3. New optional color adjustment layer, red: -100, -3,03,0. Yellow: -59, -6, -23, +1 Green: +9 , +5, -100, +27. cyan: +8, -76, -3, -100. White: +1, -40, -73, -10. Halftones: +16, -18, -18, -3. Black: 0,0,0, +28


1 First he took a shot a good picture.
2 with mask mask part of the sky.
3 Add the sky section, and placed in the base of the screen can be adjusted.
4 new layer to the third layer, chiefly to adjust the picture tone.
5 changes on demand is not transparent, change the layer properties to Soft Light.
6 In order to detect fuel in the texture effect, in color and then add a layer above the layer of material improve
7 layer properties to Soft Light, opacity changes on claim. This opacity is 86%
8 add mask, according to the need for appropriate trade-off screen content.
9 in order to strengthen a sense of texture, then create a new layer, filled with gray.
10 In the Add Noise filter to Gaussian and check the color, the number of custom.
11 layer to Soft Light.
12 according to the screen needs to be adjusted with the appropriate mask.
13 Noise, Add Noise - number 400, Gaussian delivery


1. open the original image, taking color, with a fix tool to nail the widespread mar to areas
2. Duplicate the layer a copy of Filter - Noise - Dust & Scratches, radius 10, threshold value of 6
3. to increase the mask layer a copy, click on the mask, the edges with a brush tool for people outside the smear,
4. to the layer 1 to Filter - Noise - Dust & Scratches, radius 10, the threshold 6,
5. layer a return to the History panel, dust and scratches in the top layer, rub with a brush coated with a spot where the eye shadow of the face to be careful
6. If required to do the high point of the high-contrast points to retain or change the point of spiritual Levels,
7. the repair of all make reference to some parameters fine-tuning your own would be better


1. open the original image in Photoshop. As the most from alive according to the low-end digital cameras, black and white field can not be well positioned, so photos will be favor this as often gray.
2. before the background copy layer, USM sharpening, number 50, radius 0.5
3. adjust levels, the right quantity of light for the high, dark tone for the amount left in the middle of the middle tone, increase the brightness of the face , 0,1.0,200
4. adjust the color balance, so that the whole picture prejudiced blue, more off the face. Shadow: -30,0,0
5. Create a new layer of black and white to enhance the contrast, choose the %
7. this time the photo is very pale, add a Hue / Saturation adjustment layer, +15 saturation.


1. to find a fold of the background, will need to produce photo drag the background layer, resize and cropping, border and background to the match,
2. adjustments - hue saturation, the whole map: saturation -35 degrees, brightness +10,
3. adjustment layers into a soft mode, the effect of the old photos out,
4. hue saturation, the whole map: 0, -80,0
5 Duplicate the layer, hue saturation - color: 340,24,0
6. create a new layer on top, fill it with black,
7. Filter - Noise - Add Noise, increase in the old sense, the number of 25%, Gaussian,
8. Blending Mode to Multiply,
9. Image - Adjustments - RP,
10. to remove the border of variegated, Select the rectangle tool to select the inside edge of the border, DEL key to delete the profile part of the variegated,
11. eraser tool clashes with people around the variegated


1 Open a picture
2 Press the d key (default foreground)
3 window - Action - Creating a new action, name - rain
4 Duplicate the layer, in the new map layer on the filter - pixelate - dot-based cell size - 3 spots of the more cumbersome rain on the larger dot of the smaller more rain.
5 Image - Adjustment - Threshold 255. the layer mode to color filter
6 Filter - Blur - Motion Blur, Angle 76, from 22, to decide. The greater the distance on a rainy night the greater the distance the more rain, the smaller
7 Filter - Sharpen - in the implementation of a filter - sharpen
8 point window - Action - point to stop playing; then play the selected movement (really copied layer) 3 times (so there are four rain layer)
9 to open the vigor in the first skeleton off the top three layers on the eyes, leaving merely the background and layer 1 eyes; 2 layer 1 border the eyes closed, to open the Layer 1 copy of the eyes; 3 layer 1 border off a copy of the eye, open the Layer 1 copy of the 2 eyes; 4 frames off layer 1 copy 2 eyes, open the Layer 1 copy 3 of the eyes in the alternative of all the frames, set up time of 0.2 seconds.
10 last save animated GIF format.